souldraw

[Nestafari]

Hi what kind of vinyl do i have to order form souldraw to have a good result?

Thank you

I m gonna make my side art + cp + kickplate

I also need my marquee can i do that with them too?
What do you think of souldraw? Is it ok?

 

[PL1]

Some people have mentioned minor problems with adhesion on some edges/corners. (May have been a cleaning/prep issue)  If you can wrap it around or secure it under t-molding, you should be fine.

Jammin0 used them for his Ninja Monkeys build. His Souldraw art recap is here.

This post covers the materials he selected for his cpo and marquee.


Scott

[DrChek]

Hi what kind of vinyl do i have to order form souldraw to have a good result?

Thank you

I m gonna make my side art + cp + kickplate

I also need my marquee can i do that with them too?
What do you think of souldraw? Is it ok?

 

I'd think about GameOnGrafix for the CPO unless it's going to be under plexi. The GOG material is so much thicker I'd think it would hold up to the constant touching better than the SouldDraw material.

I have a SD CPO on my Spike machine and it is just fine for a machine that gets light single player action, but I'm using SD for my side art and GOG for my marquee and CPO on my latest project.

[Nestafari]

Thx,