Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: VGA to component trouble.  (Read 2466 times)

0 Members and 1 Guest are viewing this topic.

JOHN HOWARD

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:January 28, 2016, 10:10:17 pm
  • na na na na na na....
VGA to component trouble.
« on: September 19, 2012, 04:52:56 am »
I'm hoping you guys will be able to help, I'm trying to go from my PC (Nvidia GeForce 9800 GT) to a analog component TV via a VGA to component cable. after some tweaking in Nvidia control panel I get the image below. any ideas on how to get this to work properly?

TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:July 16, 2024, 06:54:08 am
  • @!#?@!
    • My Arcade
Re: VGA to component trouble.
« Reply #1 on: September 19, 2012, 11:54:54 pm »
What TV is it?  The PC is probably outputting 480p instead of 480i.   Your TV might not support 480p.

JOHN HOWARD

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:January 28, 2016, 10:10:17 pm
  • na na na na na na....
Re: VGA to component trouble.
« Reply #2 on: September 20, 2012, 08:43:38 am »
It's a panasonic Tx-29fx50a this is the manual (http://dl.owneriq.net/b/bafb2d49-c737-41a1-8c6e-d1eda3593bb8.pdf) o cpuldn't find anything about 480 compatibility, but how can i change that output from a pc to the TV??

TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:July 16, 2024, 06:54:08 am
  • @!#?@!
    • My Arcade
Re: VGA to component trouble.
« Reply #3 on: September 21, 2012, 12:57:53 am »
It's a panasonic Tx-29fx50a this is the manual (http://dl.owneriq.net/b/bafb2d49-c737-41a1-8c6e-d1eda3593bb8.pdf) o cpuldn't find anything about 480 compatibility, but how can i change that output from a pc to the TV??

What resolution are you outputting to the TV?  I think your video card expects you to connect the VGA to component cable to HDTVs.  You can get some videocards to output 480 and below using soft15khz.  Here's a list of compatible cards: http://community.arcadeinfo.de/showthread.php?7925-Getestete-Grafikkarten

JOHN HOWARD

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 30
  • Last login:January 28, 2016, 10:10:17 pm
  • na na na na na na....
Re: VGA to component trouble.
« Reply #4 on: September 25, 2012, 12:17:19 am »
Thanks for your help, instead of buying a new card I bit the bullet and just decided to buy this from the local Jaycar store (Australia's equivalent of radio shack) http://www.jaycar.com.au/productView.asp?ID=XC4871

rCadeGaming

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1256
  • Last login:April 13, 2025, 12:14:40 pm
  • Just call me Rob!
Re: VGA to component trouble.
« Reply #5 on: September 26, 2012, 09:59:52 pm »
That will look god-awful.  Start reading here:

http://forum.arcadecontrols.com/index.php/topic,121491.0.html

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 13, 2025, 09:49:34 pm
  • I break stuff...then fix it...sometimes
Re: VGA to component trouble.
« Reply #6 on: September 26, 2012, 10:12:16 pm »
Thanks for your help, instead of buying a new card I bit the bullet and just decided to buy this from the local Jaycar store (Australia's equivalent of radio shack) http://www.jaycar.com.au/productView.asp?ID=XC4871

i have one...

 and yes, this:
That will look god-awful.  Start reading here:

http://forum.arcadecontrols.com/index.php/topic,121491.0.html

i also bought it for $12 off ebay. THIS ONE
« Last Edit: September 26, 2012, 10:17:50 pm by lilshawn »

Yenome

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 547
  • Last login:November 12, 2024, 07:07:56 pm
  • Punch a fish. Make a wish
Re: VGA to component trouble.
« Reply #7 on: October 01, 2012, 06:49:19 pm »
boot the pc in low res vga mode. f8 during post should bring up the list for it. i spam f8 when i need to get in to it. if it looks good then its cause your res is too high like others have said. my 32in tv does the same thing if its set above 480i.
My Gf made me put a sig up. /whipped