Author Topic: Makvision 27"/29" Tri-mode tube (viewable area) measurements? (Read 1373 times)

emuola · « **on:** September 16, 2012, 06:47:21 am »

Hi.

Could someone please tell me the exact measurements of the tube. With the tube I mean the actual effective area that shows something (viewable area)

I have an existing cab, which I'm planning to upgrade and I want to know if the current bezel is big enough.

*edit*

It would be great if someone could also measure the exact maximum width of the tube (viewable + non-vievable). It's impossible to tell from the available images, if the tube is as wide as the mounting frame. This could be a tight fit...

Gray_Area · « **Reply #1 on:** September 18, 2012, 03:19:04 pm »

The viewable area is 27 inches, diagonal. As you know the aspect, you need only know the equation to figure it out.

You can probably find a manual of the monitor in question, or *some* 29/27" monitor, and it'll have a diagram. Maybe of everything.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Makvision 27"/29" Tri-mode tube (viewable area) measurements? (Read 1373 times)

emuola

Makvision 27"/29" Tri-mode tube (viewable area) measurements?

Gray_Area

Re: Makvision 27"/29" Tri-mode tube (viewable area) measurements?