Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Connecting an original XBOX to a PC Monitor - Solved and Success  (Read 22165 times)

0 Members and 1 Guest are viewing this topic.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
Anybody familiar with this?

Has anyone ever done this, and how do you do it.

I've been all over the web and can't find a decent tutorial or answer.

« Last Edit: May 19, 2012, 09:07:49 am by rablack97 »

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3564
  • Last login:Yesterday at 12:48:32 pm
  • my joystick is bigger than your joystick !
« Last Edit: May 11, 2012, 01:07:36 am by SNAAKE »

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
« Last Edit: May 11, 2012, 12:50:15 pm by rablack97 »

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3564
  • Last login:Yesterday at 12:48:32 pm
  • my joystick is bigger than your joystick !
Re: Connecting an original XBOX to a PC Monitor
« Reply #3 on: May 11, 2012, 02:10:30 pm »
hdbox pro is as good as x2vga. its full HD.

I dont know about that box. just go with the hd pro. check reviews on yt.

crashwg

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3076
  • Last login:May 24, 2019, 11:01:05 am
Re: Connecting an original XBOX to a PC Monitor
« Reply #4 on: May 11, 2012, 05:44:16 pm »
Another alternative:

http://forum.arcadecontrols.com/index.php?topic=119841.0

*Requires a modded XBOX*
« Last Edit: May 11, 2012, 05:53:31 pm by crashwg »
If there's bees in the trap I'm catching em
By the thorax and abdomen
And sanding the stingers down to a rough quill
Then I dip em in ink, and I scribble a bit
But if it they wriggle then I tickle em until they hold still
Lemme say it again
In my land of pretend
I use bees as a mf'n pen

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
Re: Connecting an original XBOX to a PC Monitor
« Reply #5 on: May 11, 2012, 06:47:27 pm »
I dont think they make X2VGA's anymore, if you have a link, please share.

The HDPRO's come from China, i recall a hobbyist saying it took him 2 months to get the thing.  Never got the lowdown on whether it was worth it.

Another alternative:

http://forum.arcadecontrols.com/index.php?topic=119841.0

*Requires a modded XBOX*

This does me no good unless you plan on building me one, and by that time, i might as well get one of the boxes for the same price, no?

I've found a few Dell 19" monitors for like USD 30 a piece.  Want to know if it's worth the trouble, cause if none of these work then im screwed with a closet full of monitors.

johnm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
  • Last login:May 28, 2025, 11:40:55 am
Re: Connecting an original XBOX to a PC Monitor
« Reply #6 on: May 11, 2012, 08:26:57 pm »


Check this list for compatible Sync on Green monitors

http://ps-2.kev009.com/sog/

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
Re: Connecting an original XBOX to a PC Monitor
« Reply #7 on: May 12, 2012, 12:14:32 am »
So, if it is a sync on green monitor, a soft modded xbox it should would with the cheaper vga to component cable?

Or does it still need some type of converter chip to work?

crashwg

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3076
  • Last login:May 24, 2019, 11:01:05 am
Re: Connecting an original XBOX to a PC Monitor
« Reply #8 on: May 12, 2012, 01:39:26 am »
I haven't done it myself but in this thread, specifically in posts numbers 280 and 281 you'll see an example of how you can hook up to a "SOG" monitor.

You will still need to run a modded VGA BIOS but the sync separator chip is NOT necessary if you have an SOG monitor.
If there's bees in the trap I'm catching em
By the thorax and abdomen
And sanding the stingers down to a rough quill
Then I dip em in ink, and I scribble a bit
But if it they wriggle then I tickle em until they hold still
Lemme say it again
In my land of pretend
I use bees as a mf'n pen

johnm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
  • Last login:May 28, 2025, 11:40:55 am
Re: Connecting an original XBOX to a PC Monitor
« Reply #9 on: May 12, 2012, 06:44:51 am »

Some monitors may show a green tint without a flashed bios, if you have an Xbox 1-1.5 then you can either flash a new bios or run the frosty softmod . My monitor doesn't support SoG so i need to build a cable with the lm1881 sync splitter
If you have a 1.6 box the only option you have is a video convertor board, of course you could use this for any xbox if you wanted and between consoles.

http://www.ebay.co.uk/itm/RGB-CGA-EGA-YUV-VGA-ARCADE-HD-VIDEO-CONVERTER-BOARD-Arcade-Games-etc-/261021609865?pt=LH_DefaultDomain_0&hash=item3cc619af89 (there's also ones with dual vga output)

northerngames

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2927
  • Last login:April 09, 2016, 04:18:51 pm
Re: Connecting an original XBOX to a PC Monitor
« Reply #10 on: May 12, 2012, 09:59:33 pm »
there is also the backward compatible 360 for around $100.00 shipped and it does 1080 on a pc monitor  :burgerking:

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
Re: Connecting an original XBOX to a PC Monitor
« Reply #11 on: May 13, 2012, 03:48:55 am »
I've got a closet full of Original xboxes, i'm trying to bring back to life.... :)

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2215
  • Last login:August 09, 2024, 08:49:57 pm
  • If you don't try, you have no chance at innovation
Re: Connecting an original XBOX to a PC Monitor - Solved and Success
« Reply #12 on: May 19, 2012, 09:08:32 am »
Quote
The cheapest route, which im going to follow and I'll update if it works.  Buy the following

VGA to RCA Cable $1.90
RCA Coupler $.68
Xbox Component Cable 3.99

Locate a compatible Sync on Green Monitor (craigslist), which shouldn't be difficult, folks are giving away Dell 19" monitors with SOG these days. I've located a few for a about $30.00.

Finally Upgrade Softmod with Frosty's Dual-Boot VGA Softmod v1.0
Quote

My parts came in and I've tested this setup and it works perfect. You have to tweak the monitor screen via the monitor menu, and the xbox menus to get it to fullscreen.  Looks really good....Super Happy Now...

« Last Edit: May 19, 2012, 09:11:37 am by rablack97 »

ark_ader

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5645
  • Last login:March 02, 2019, 07:35:34 pm
  • I glow in the dark.
Re: Connecting an original XBOX to a PC Monitor - Solved and Success
« Reply #13 on: May 19, 2012, 02:38:10 pm »
Quote
The cheapest route, which im going to follow and I'll update if it works.  Buy the following

VGA to RCA Cable $1.90
RCA Coupler $.68
Xbox Component Cable 3.99

Locate a compatible Sync on Green Monitor (craigslist), which shouldn't be difficult, folks are giving away Dell 19" monitors with SOG these days. I've located a few for a about $30.00.

Finally Upgrade Softmod with Frosty's Dual-Boot VGA Softmod v1.0
Quote

My parts came in and I've tested this setup and it works perfect. You have to tweak the monitor screen via the monitor menu, and the xbox menus to get it to fullscreen.  Looks really good....Super Happy Now...



I found the component to VGA cable - going to try it out later tonight and see if I have a working VGA out for my next cab.

Still want a X Arcade in there though, even though a pad hack would suffice.
If I had only one wish, it would be for three more wishes.