Author Topic: Hanatrex Polo 25" and Xbox 360 (Read 1684 times)

Mark Thomas · « **on:** April 21, 2012, 05:15:20 am »

How would I go about connecting a Hanatrex Polo 25" arcade monitor to a Jtag Xbox 360? I currently have a PC, jpac and arcade graphics card from Ultimarc but can't figure out best way to set up Xbox? Also would there be a way to quickly swap between PC and Mame to Jtag Xbox?

Any thoughts and advice would be very much appreciated

lettuce · « **Reply #1 on:** April 22, 2012, 07:28:38 am »

You probably need a SCRAT TO JAMMA device

Mark Thomas · « **Reply #2 on:** April 27, 2012, 07:24:38 am »

Thanks buddy, where would I get one from and would the scart option give the best visual quality?

lettuce · « **Reply #3 on:** April 27, 2012, 02:52:36 pm »

This guy sells a rather nice one, has video amp built in...

http://shmups.system11.org/viewtopic.php?f=6&t=28069

Yeah Scart its better than , S-Video and composite. Im not sure using VGA cable from the 360 will give a low enough resolution, Ideally for an arcade look your wanting a 240p singal from the 360, and dont thing VGA can do that. Someone chip in here if they know more??


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Hanatrex Polo 25" and Xbox 360 (Read 1684 times)

Mark Thomas

Hanatrex Polo 25" and Xbox 360

lettuce

Re: Hanatrex Polo 25" and Xbox 360

Mark Thomas

Re: Hanatrex Polo 25" and Xbox 360

lettuce

Re: Hanatrex Polo 25" and Xbox 360