Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Will a 27 inch tv fit in my cab?  (Read 1881 times)

0 Members and 1 Guest are viewing this topic.

RedSquirrel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 224
  • Last login:September 18, 2003, 12:07:55 pm
  • I'm a llama!
Will a 27 inch tv fit in my cab?
« on: September 28, 2003, 06:25:45 pm »
My cab is based on lucids design. I have about 26 inchs to fit a tv.

I really wanted to get a 25inch tv, but they are hard to find and are kinda expensive (im looking at used tv's).

There are however several cheap-ish 27 inch tvs I can get my hands on, but the case is whether or not it could fit in the cab.

I have a 27inch tv in my room, but because of the speakers it adds about an extra 6 inches total.

Now if I could find a tv, without side mounted speakers (say 1 inch either side) would it fit?

Anyone used a 27 inch tv in there cab?

any replys thanks.

RedSquirrel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 224
  • Last login:September 18, 2003, 12:07:55 pm
  • I'm a llama!
Re:Will a 27 inch tv fit in my cab?
« Reply #1 on: September 28, 2003, 06:46:27 pm »
saying that, I have just found a 25inch one. Just hope its still available as im working all day Mon & Tue  and I wont be able to have a look till wensday  :(

TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:July 20, 2025, 03:56:38 am
  • @!#?@!
    • My Arcade
Re:Will a 27 inch tv fit in my cab?
« Reply #2 on: September 28, 2003, 07:02:04 pm »
I have one that is 25 3/4".  Check my website for the model number.  It was a sharp tv from best buy.

bionicbadger

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 248
  • Last login:October 01, 2012, 10:37:26 am
  • Big Deal
    • Mame Cabinet Page
Re:Will a 27 inch tv fit in my cab?
« Reply #3 on: September 29, 2003, 11:31:50 am »
My cabinet is a modified version of Lucid's.  I used a 27" Toshiba TV in mine, but I made the cabinet slightly wider (by an inch or 2 if I remember correctly) just so I could fit the TV in.  Have you already built your cabinet?  I waited until I got a TV so I could build the cabinet to fit it.

RedSquirrel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 224
  • Last login:September 18, 2003, 12:07:55 pm
  • I'm a llama!
Re:Will a 27 inch tv fit in my cab?
« Reply #4 on: September 29, 2003, 02:15:40 pm »
My cabinet is a modified version of Lucid's.  I used a 27" Toshiba TV in mine, but I made the cabinet slightly wider (by an inch or 2 if I remember correctly) just so I could fit the TV in.  Have you already built your cabinet?  I waited until I got a TV so I could build the cabinet to fit it.

Yeah its pretty much built. Im just having a hard enough time finding used 25inch tvs, and even 27" now to think of it. I might go with a 24inch but ill wait a while and see.

Bill_S

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:June 22, 2018, 08:23:57 am
  • aka buzzdalf
Re:Will a 27 inch tv fit in my cab?
« Reply #5 on: September 30, 2003, 07:01:27 am »
I have the Toshiba 27A33 (I think that's the model #).
It's 25 3/4" wide.
I also have a JVC 27" TV (27S33) in another cab that's 25 3/4" wide.

daeven

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
  • Last login:July 15, 2022, 12:17:33 pm
  • Llama this!
Re:Will a 27 inch tv fit in my cab?
« Reply #6 on: September 30, 2003, 12:33:07 pm »
I have a 27" Sony that fits the width of my LuSid-based cabinet.  The problem for me is the depth of the TV is too much-it sticks out the front.  I suppose I could cut a hole in the back and let it stick out there, but I'm planning on replacing the TV with the WG D9200 which isn't as deep.