August 04, 2025, 10:44:06 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Arcade Stuff
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
got a wg 7000 with a problem
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: got a wg 7000 with a problem (Read 1424 times)
0 Members and 1 Guest are viewing this topic.
GMZombie
Trade Count:
(
0
)
Full Member
Offline
Posts: 379
Last login:March 22, 2022, 10:11:23 am
I am a living Legend who fixes stuff... mostly
got a wg 7000 with a problem
«
on:
March 17, 2012, 10:53:18 pm »
Have a wg7000 that everytime it gets power the fuse in the chassis blows. I just recaped it and it was working fine then I must have shorted a wire to the metal part of the chassis when I was moving wires around and pop. It blew the fuse and now it always blows the fuse. Where do I start?
Logged
buffett
Trade Count:
(
0
)
Full Member
Offline
Posts: 123
Last login:December 13, 2016, 01:28:10 am
Re: got a wg 7000 with a problem
«
Reply #1 on:
March 18, 2012, 02:34:02 am »
measure D19-23 to see if they have shorted.
test your H.O.T. Q11 to see if its shorted.
test C36/38 to see if there shorted.
test your VR, IC4 to see if its shorted.
if any of those parts show bad in circuit. pull them and test again.
Peace
Buffett
Logged
Come to MAGfest and game in the 24-7 arcade for 4 days.
www.magfest.org
And see my collection of 90+ Arcades and growing.
Need your (K7000, 4900, std/med res 13"-25") or Sanyo fixed!!!! pm me.
Visit my website.
www.thearcadebuffett.com
For Monitor and PCB repairs.
Fully rebuilt chassis ready to ship. Trade'ins welcome
I have met --- Tim McVey --- world nibbler champion and many of you have not.
b3dr0ck
Trade Count:
(
0
)
Full Member
Offline
Posts: 122
Last login:January 05, 2014, 05:49:02 pm
Re: got a wg 7000 with a problem
«
Reply #2 on:
March 23, 2012, 05:53:14 pm »
I had, (still have) a WG25" K7000 that would blow the fuse everytime. I was able to diagnose the flyback and HOT were blown (flyback literally blown out the top, and HOT is shorted)
Logged
buffett
Trade Count:
(
0
)
Full Member
Offline
Posts: 123
Last login:December 13, 2016, 01:28:10 am
Re: got a wg 7000 with a problem
«
Reply #3 on:
March 23, 2012, 10:17:40 pm »
OK check all the stuff i talked about above and if you cant get it.
post what you have done and i can try and help you get it fixed.
i repair them if you don't want to do it.
pm me.
Peace
Buffett
Logged
Come to MAGfest and game in the 24-7 arcade for 4 days.
www.magfest.org
And see my collection of 90+ Arcades and growing.
Need your (K7000, 4900, std/med res 13"-25") or Sanyo fixed!!!! pm me.
Visit my website.
www.thearcadebuffett.com
For Monitor and PCB repairs.
Fully rebuilt chassis ready to ship. Trade'ins welcome
I have met --- Tim McVey --- world nibbler champion and many of you have not.
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
got a wg 7000 with a problem