Black Crome Surf Planet Conversion

[LOOTER]

Black Crome Surf Planet Conversion

Custom CP ANGLED LAY OUT JUST LIKE THE REST OF MY PROJECTS.

27'' Crt Tv
Ipac 2
Concave Happ Push Buttons
Dell Pentium 4 OS Windows XP Pro
$10.00 PC speakers soldered to original cab speakers.
New Chrome T Molding
Sray painted the backside of the Plexiglas ti give it tha high gloss look for the CP and the front sife of the cab eith a new aluminum. Trim for the bottom and top of thethe arcade.

[LOOTER]

 

[LOOTER]

Hmm

[LOOTER]

Almost done just reinstalled the painted Plexiglas tha goes in front of the arcade to eliminate the coin door hole to give it a nice glossy look. With the bottom aluminum trim.

[LOOTER]

 soldered two wires to the Tv pcb board on and off button to a external button on the top side of the Cab. I did the same for the Dell Pc it did not have the regular wires for the mothere board that othe pc have this one dell had s pcb board with a similar in and off switch that had to be silderrd as well. Had to have two separate on and off buttons due to the fact for some reson when I link the wires to one individual button the tv keeps going from channel 3 to video randomly on it's own at first I tough someone was messing with me with the remote but then I ulinked the pc and tv and the problem went away.

[LOOTER]

On off

[LOOTER]

I hate this part

[LOOTER]

Lets take a look

[LOOTER]

Here is the rest of the guts just need to organize the  wires with some zip ties

[LOOTER]

Got it programed with hypespin and instantshell to only function as a dedicated MAME CAB. The only issue I have after I shelled the PC while my intro video to Hyperspin a found new hardware wizard pops up for the Ipac 2 and I have to select enter 3 times if i select cancel instead of continue my Ipac wont function. But that's no problem I will just continue to select continue with the enter button that was installed on the CP.

[LOOTER]

Left and right speaker

[LOOTER]

Here is my low voltage Fan and light switch, in this picture I got the 12V LED for the Marquee for now till I go buy a working 12Vhard fan

[LOOTER]

Here is the ghetto lighting set up I went with the aluminum foil paper for the back and top to help project the lighting.

[LOOTER]

That little LED strip lights up like the 4th of July.

[LOOTER]

Final picture Black Chrome is done 100%but no keyboard needed everything is controlled witb the CP. I will post a quick video of the start up.

[TopJimmyCooks]

nice mame conversion.  I'm always a sucker for black on black color schemes.  

[kahlid74]

I like the layout, kind of bulky and different.  Very functional to boot IMO.  Black is always a great color for a cab as it hides so many imperfections.  Good re-work man!