Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: k7000 19w7602 top foldover  (Read 1874 times)

0 Members and 1 Guest are viewing this topic.

dosmame

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:November 22, 2012, 09:50:13 am
    • DOS MAME
k7000 19w7602 top foldover
« on: February 23, 2012, 09:52:51 pm »
Hi, I've got a k7000 19w7602 with top foldover that has been the same before and after a cap kit.

I've read a few articles where the 50/60hz pot needs adjusting, but not my specific chassis. If I adjust it nothing seems to happen - should it ?

TIA
DM









buffett

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 123
  • Last login:December 13, 2016, 01:28:10 am
Re: k7000 19w7602 top foldover
« Reply #1 on: March 11, 2012, 05:34:49 am »
have you fixed your problem.

how do you have your synk hooked up.

you should only use pin 10 on the video input header.

Peace
Buffett
Come to MAGfest and game in the 24-7 arcade for 4 days. www.magfest.org  And see my collection of 90+ Arcades and growing.
Need your (K7000, 4900, std/med res 13"-25") or Sanyo fixed!!!! pm me.
Visit my website. www.thearcadebuffett.com For Monitor and PCB repairs.
Fully rebuilt chassis ready to ship. Trade'ins welcome
I have met --- Tim McVey --- world nibbler champion and many of you have not.

dosmame

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:November 22, 2012, 09:50:13 am
    • DOS MAME
Re: k7000 19w7602 top foldover
« Reply #2 on: March 20, 2012, 04:37:51 pm »
ah, thanks for the reply

no, it's not fixed, and it's hooked up via a j-pac and pci-e advandevga card

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: k7000 19w7602 top foldover
« Reply #3 on: March 21, 2012, 03:19:15 am »
Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7514
  • Last login:August 01, 2025, 03:19:11 pm
  • I break stuff...then fix it...sometimes
Re: k7000 19w7602 top foldover
« Reply #4 on: March 22, 2012, 02:59:42 pm »
Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

yes adusting the pot should make the foldover worse or cure it.

if it's doing nothing, maybe the pot is damaged.

dosmame

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:November 22, 2012, 09:50:13 am
    • DOS MAME
Re: k7000 19w7602 top foldover
« Reply #5 on: April 15, 2012, 07:54:51 am »
Try adjusting your height down a bit.  And, yes, adjusting the 50/60Hz pot should have SOME effect on screen.

yes adusting the pot should make the foldover worse or cure it.

if it's doing nothing, maybe the pot is damaged.

good call, I'll try and find a replacement. thanks.