Author Topic: padhack using DDR mat for the 360? looking for info (pics inside) (Read 1466 times)

sharpfork · « **on:** January 28, 2012, 10:14:48 pm »

I picked up a 360 today and it came with a DDR pad. I took it apart and after a bit of black crap removal, I have big fat solder points for most buttons.

I'm really curious about the "not used" points on the PCB, hoping I can get shoulder buttons or something off it. Does anyone have any info about using these things? They can be had for ~$10 on CL so they might be a good option if there is a solder point for shoulder buttons.

Howard_Casto · « **Reply #1 on:** January 30, 2012, 12:46:19 pm »

You've got one in your hands, so you are the best person to find out.

Plug it in, start connecting the "not used" points to a ground one at a time and see what happens.

Keep in mind that sometimes gamepads have multiple grounds, so one of those points might be the ground for the others.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: padhack using DDR mat for the 360? looking for info (pics inside) (Read 1466 times)

sharpfork

padhack using DDR mat for the 360? looking for info (pics inside)

Howard_Casto

Re: padhack using DDR mat for the 360? looking for info (pics inside)