Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Hantarex Polo Black lines  (Read 1522 times)

0 Members and 1 Guest are viewing this topic.

codenamed

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 64
  • Last login:January 06, 2012, 12:46:04 pm
Hantarex Polo Black lines
« on: December 08, 2011, 10:01:47 pm »
I bought this game and the monitor was dead the owner said it was arcing. I replaced the flyback and recapped it now I have black lines through the left of the screen. Has anyone ever experienced this? The flow chart says caps should have fixed the problem.



corycet

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 25
  • Last login:June 09, 2012, 01:35:58 am
Re: Hantarex Polo Black lines
« Reply #1 on: December 08, 2011, 11:45:37 pm »
From the picture you posted it looks like the screen control is turned up to high, but sometimes that's hard to tell from a jpeg computer pic. The black line may just be your horizontal position is to far to the right causing it to fold over on the left side. You may have accidentally placed the wrong value cap in the wrong location as well. Double check your work.