Hantarex Polo 28 chassis clicking...but sometimes work!

[AE35]

Hi all!

I have a Hanty Polo 28 chassis, that has the problem that it's
sometimes clicking(no picture>) and then suddenly works(image
and no clicking)

What could cause this intermittent problem? I'm hoping a cap problem:)
Maybe the TDA 2593?

Thanks!

Nicholas

[grantspain]

most likely a cap

[AE35]

Ok, I've changed most of them, but only had a 470uF 35V not a 40V...so
I went to the electronics store for a 40V, and the guy gave me another
35V

So, can I use a 35V in place of a 40V?

Thanks!

Nicholas

[grantspain]

should be ok unless it was under rated last time-never seen a 40v cap on a polo chassis

[AE35]

Oh...maybe I got the wrong way. The cap only has this text on top: "470 40"
nothing on the sides, nothing else....maybe it's 470V and 40uF ?

It's the larger one south of the tip of the red arrow, at the two raised resistors

[grantspain]

what position on the pcb mate

[AE35]

http://img329.imageshack.us/img329/680/whatisitlowrezimgpx5.jpg

It's the larger one south of the tip of the red arrow, at the two raised resistors

I was just writing it when you made your post!:)

[grantspain]

470uf 35 volt

[AE35]

Awesome:) Thanks!!!