Author Topic: lighting coin door (Read 4225 times)

portugese pirate · « **on:** September 10, 2011, 07:05:46 pm »

Could I take this harness http://www.ebay.com/itm/MAME-COIN-DOOR-BUTTON-ILLUMINATION-KIT-/360349863650?pt=LH_DefaultDomain_0&hash=item53e6868ee2 and attach it to a 4 pin molex and then directly to my psu.......has anyone used this harness before....if so how is lighting and how long is it? Or does someone have a better cheaper alternative? As i said want to run it off pc psu.........thank you for your help as usual

Nephasth · « **Reply #1 on:** September 10, 2011, 07:44:46 pm »

Quote from: portugese pirate on September 10, 2011, 07:05:46 pm

Or does someone have a better cheaper alternative?

Wire up your own harness for a couple bucks (if that).

BobA · « **Reply #2 on:** September 12, 2011, 01:27:28 pm »

Yes you can attach it to a PS molex connector to get 12V. If you have a coin door with lights already then you can build your own a lot cheaper. If you do not have the lights then it is probably a good buy for you.

portugese pirate · « **Reply #3 on:** September 14, 2011, 02:22:51 pm »

thanks for the posts.....ordered up some leds and will try to make up a harness to hook up to 12v molex


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: lighting coin door (Read 4225 times)

portugese pirate

lighting coin door

Nephasth

Re: lighting coin door

BobA

Re: lighting coin door

portugese pirate

Re: lighting coin door