Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How to Open the freakin' Focus Lead socket on Hantarex Polo 25"  (Read 2343 times)

0 Members and 2 Guests are viewing this topic.

whoamonga

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 74
  • Last login:June 04, 2025, 09:24:09 pm
How to Open the freakin' Focus Lead socket on Hantarex Polo 25"
« on: July 09, 2011, 08:22:20 pm »
Subject says most of it, I just can't get this thing open and I'm really scared of breaking the plastic!  Anybody have any pointers?  I'm also going to assume it's bad juju to split the focus wire.
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:Yesterday at 04:58:13 pm
Re: How to Open the freakin' Focus Lead socket on Hantarex Polo 25"
« Reply #1 on: July 09, 2011, 08:25:44 pm »
normally there is a very small slot next to the wire,you can push a cable tie in and it releases the wire
Logged

smartbomb2084

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 654
  • Last login:January 13, 2021, 03:14:53 pm
  • Having a SMART phone will make you DUMB.
Re: How to Open the freakin' Focus Lead socket on Hantarex Polo 25"
« Reply #2 on: July 10, 2011, 10:11:38 am »
It is bad JuJu to even OWN a Hantarex Polo 25.  Gotta be one of the worst monitors ever made.
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:Yesterday at 04:58:13 pm
Re: How to Open the freakin' Focus Lead socket on Hantarex Polo 25"
« Reply #3 on: July 10, 2011, 10:59:32 am »
Quote from: smartbomb2084 on July 10, 2011, 10:11:38 am
It is bad JuJu to even OWN a Hantarex Polo 25.  Gotta be one of the worst monitors ever made.
i disagree,probably one the best monitors i have seen in 25 years of coin op
Logged

whoamonga

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 74
  • Last login:June 04, 2025, 09:24:09 pm
Re: How to Open the freakin' Focus Lead socket on Hantarex Polo 25"
« Reply #4 on: July 10, 2011, 03:44:35 pm »
Well I got the wire out.  I did the twist and pull method mentioned here: http://forum.arcadecontrols.com/index.php?topic=93711.0;prev_next=prev#new

That actually worked!  I got the focus lead out, problem is it didn't want to grab the new focus lead I put in.  I could push the focus lead in all the way, but it would always let me pull it right back out. 

I tested the chassis anyway and it still had no HV.  No hum or neck glow, and I'm not sure if it's because of the focus wire issue or something further wrong with the chassis.  I replaced HOT and Flyback and got about halfway done with the capkit.  Still working through it though.
Logged
Pages: [1]
  
Go Up
« previous next »