Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Wells Gardner 25" 7194 Help Please  (Read 1192 times)

0 Members and 1 Guest are viewing this topic.

skinz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:February 24, 2013, 10:46:10 am
Wells Gardner 25" 7194 Help Please
« on: January 23, 2011, 06:12:51 pm »
OK so my monitor looks EXACTLY like this guys - I have a WG 7194 just like this guy and I have the EXACT wavy line at the top of the screen.  His problem was never resolved properly.  I don't have a Chassis to replace mine with and was wondering if anyone else has seen this problem.

Thanks

http://forum.arcadecontrols.com/index.php?topic=99163.0
Logged

skinz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:February 24, 2013, 10:46:10 am
Re: Wells Gardner 25" 7194 Help Please
« Reply #1 on: January 23, 2011, 08:53:14 pm »
Turn this???

Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 04, 2025, 12:24:07 pm
  • I break stuff...then fix it...sometimes
Re: Wells Gardner 25" 7194 Help Please
« Reply #2 on: January 24, 2011, 12:09:47 am »


turn this first. the 50/60 pot fixes stuff that looks like this. if not maybe a cap is going.
Logged

skinz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:February 24, 2013, 10:46:10 am
Re: Wells Gardner 25" 7194 Help Please
« Reply #3 on: January 24, 2011, 07:51:40 am »
50/60 pot doesnt fix it either - possibly a gentile combo of the two - I'll try those 2 again - so it's a "DON'T TOUCH" on the coil H-Size pot?

I've turned everyhting else
« Last Edit: January 24, 2011, 01:11:31 pm by skinz »
Logged

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: Wells Gardner 25" 7194 Help Please
« Reply #4 on: January 24, 2011, 08:45:45 pm »
for kicks , check/replace the following :

c57   47uF/160v(250)    use 105 degree
c23   47uF/25v
c22     1uF/50v
c18     1uF/50v
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 04, 2025, 12:24:07 pm
  • I break stuff...then fix it...sometimes
Re: Wells Gardner 25" 7194 Help Please
« Reply #5 on: January 25, 2011, 09:01:21 am »
Ya, I'm leaning towards bad caps too.
Logged
Pages: [1]
  
Go Up
« previous next »