Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Ok so this is a uber noob question...  (Read 1419 times)

0 Members and 1 Guest are viewing this topic.

Mikezilla

  • I have a hairy back and everything!
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1676
  • Last login:July 18, 2017, 07:06:56 pm
  • I can't see the picture darn it!!!
Ok so this is a uber noob question...
« on: October 12, 2010, 06:47:51 pm »
...Can you run hyperspin while using MAME32? Like I said, Im a noob, so, I got started with MAME32 being the easiest, but Im still configuring things, and I wanted to ask you guys if I could do this before I tried to DL and configure hyperspin.

Thanks!  :notworthy:
Pictures are overrated anyway.

brian_hoffman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:July 02, 2011, 09:02:20 pm
Re: Ok so this is a uber noob question...
« Reply #1 on: October 12, 2010, 07:39:07 pm »
Hyperspin is a frontend, it can call any version of MAME.

Mame32 I believe is no more. I think newer versions are called MAMEUI, the above is still accurate though.

You should have no problems using it while trying to get HS off the ground.

Mikezilla

  • I have a hairy back and everything!
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1676
  • Last login:July 18, 2017, 07:06:56 pm
  • I can't see the picture darn it!!!
Re: Ok so this is a uber noob question...
« Reply #2 on: October 13, 2010, 11:43:04 am »
Ah ok. I bought Saint's book with the CD and MAME32 was on it, but I was reading that it was considered a front as well, so I didnt know if it would clash with Hyperspin or not.

Gotcha.

Cool, thanks for the info.  :cheers:
Pictures are overrated anyway.

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: Ok so this is a uber noob question...
« Reply #3 on: October 13, 2010, 01:36:01 pm »
It is a front end also.  Using just regular command line mame may save you a little CPU overhead.  YMMV.