Author Topic: Arcade repair fail (Read 7054 times)

pinballwizard79 · « **Reply #2 on:** September 08, 2010, 10:45:42 pm »

Top that

WhereEaglesDare · « **Reply #3 on:** September 08, 2010, 11:03:08 pm »

Poor guy

wp34 · « **Reply #4 on:** September 08, 2010, 11:03:32 pm »

Look at the smile on that dude's face. How can it be a fail?

Smeghead · « **Reply #5 on:** September 09, 2010, 01:19:27 am »

Its about 10% fail 90% win
hes only a cheap TV and a bezel away from awesomeness!

bkenobi · « **Reply #6 on:** September 09, 2010, 01:53:11 am »

25" arcade monitor > 17" PC display

Otherwise though, it doesn't look too bad to me. Hell, he seems to have gotten the controls to work nicely!

Ginsu Victim · « **Reply #7 on:** September 09, 2010, 11:36:24 am »

bkenobi · « **Reply #8 on:** September 09, 2010, 11:46:44 am »

Not necessarily. There was just a picture posted, so I don't really know what it started out like. If it was a gutted cab, then he got it back to stock (sans monitor). If he's using MAME, that's something. If he's using an original board set and just put a POS monitor in, then yeah...FAIL

Ginsu Victim · « **Reply #9 on:** September 09, 2010, 11:51:00 am »

I saw the pic wrong. I thought it was 18 Wheeler. It isn't.

Edit: Nevermind. It IS.

Osirus23 · « **Reply #10 on:** September 09, 2010, 12:39:24 pm »

Quote from: Ginsu Victim on September 09, 2010, 11:51:00 am

I saw the pic wrong. I thought it was 18 Wheeler. It isn't.

What is it then? Side art, marquee, and screen all look like it.

CheffoJeffo · « **Reply #11 on:** September 09, 2010, 12:42:39 pm »

Quote from: bkenobi on September 09, 2010, 01:53:11 am

Otherwise though, it doesn't look too bad to me. Hell, he seems to have gotten the controls to work nicely!

I doubt he did anything more than plug the monitor into the NAOMI mobo, so the controls would still work fine.

Ginsu Victim · « **Reply #12 on:** September 09, 2010, 01:10:38 pm »

Quote from: Osirus23 on September 09, 2010, 12:39:24 pm

Quote from: Ginsu Victim on September 09, 2010, 11:51:00 am
I saw the pic wrong. I thought it was 18 Wheeler. It isn't.

What is it then? Side art, marquee, and screen all look like it.

~~Dunno, because the screen appears to be a different game.~~

Nevermind, just found a screen that shows it IS the game.

I was expecting the time limit in the upper-left corner, not GEAR, but that is from the game. It's been a long time since last played it (good game).

TOK · « **Reply #13 on:** September 09, 2010, 01:51:28 pm »

I'm guilty of doing this with my Golden Tee... I used an RGB encoder and PC monitor to make sure everything else was working before dropping the cash on a new monitor.

bkenobi · « **Reply #14 on:** September 09, 2010, 02:47:16 pm »

Wait, that means he just put a PC monitor into an otherwise working cabinet?

FAIL!!!

CheffoJeffo · « **Reply #15 on:** September 09, 2010, 02:49:54 pm »

Atta boy!

Hoopz · « **Reply #16 on:** September 09, 2010, 03:13:00 pm »

Fail would be a green screen monitor. Cut the guy some slack.

JustMichael · « **Reply #17 on:** September 09, 2010, 04:40:53 pm »

Perhaps the old pc monitor is just for now until he can get (afford) the proper arcade monitor? Glad he can still use the machine.

DJ_Izumi · « **Reply #18 on:** September 09, 2010, 11:08:25 pm »

Quote from: TOK on September 09, 2010, 01:51:28 pm

I'm guilty of doing this with my Golden Tee... I used an RGB encoder and PC monitor to make sure everything else was working before dropping the cash on a new monitor.

The NAOMI and Chihiro boards I know both supported RGBHV output, so the boards can output native RGBHV to any PC monitor and it should work. I doubt any real conversion was done to make this work.

Havok · « **Reply #19 on:** September 10, 2010, 12:40:20 am »

Reminds me of this slice of awesomeness:

bkenobi · « **Reply #20 on:** September 10, 2010, 02:25:54 am »

Oooooh...a 13" display! Awesome!

severdhed · « **Reply #21 on:** September 11, 2010, 09:26:02 am »

what's next? are you going to make fun of my 17" LCD showcase cabinet too?

Turnarcades · « **Reply #22 on:** September 11, 2010, 08:42:12 pm »

Could do with a little more space on the control panel, but colour th monitor bezel in with a permo marker and you're good.

bkenobi · « **Reply #23 on:** September 11, 2010, 11:43:08 pm »

No way, showcases are a different ball game!

Malenko · « **Reply #24 on:** September 12, 2010, 09:15:13 am »

wheres the cab that had like 3 or 4 bezels?

JustMichael · « **Reply #25 on:** September 12, 2010, 08:23:33 pm »

Quote from: severdhed on September 11, 2010, 09:26:02 am

what's next? are you going to make fun of my 17" LCD showcase cabinet too?

Aren't you supposed to put that little white "base" on the ground and then put the monitor on that? Then you would get a sore neck from having to look down at the monitor....


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news