Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: K7000 dim white  (Read 1535 times)

0 Members and 1 Guest are viewing this topic.

Cisek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
  • Last login:May 19, 2023, 07:35:14 am
K7000 dim white
« on: August 04, 2010, 09:24:06 pm »
Hi
I am just after capkit and rejuvenation of WG k7000 25". The colours are great, except white. White colour seems to be a little dim, compared to RGB. Is there any way to improve/readjust it?
Logged

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: K7000 dim white
« Reply #1 on: August 04, 2010, 10:02:25 pm »
it usually takes a little time for the guns to settle after a rejuve .  ;)

assuming white balance is correct,
u may need to adjust the black level

reduce brightness and contrast levels to low levels.
adjust screen ctl ( usually lower pot on flyback ) until an image is JUST barely perceptable .
then adjust brite/contrast to desired levels.
Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: K7000 dim white
« Reply #2 on: August 05, 2010, 10:53:58 am »
Yeah, what he said.......

If your RGB all look good (bright/solid), then your white may be just that one of those adjustments is a hair off.
So basically it boils down to a bit more adjustment.
Just takes some fiddling with it.
Logged
Not a technician . . . . just a DIY'er.
Pages: [1]
  
Go Up
« previous next »