Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Diode Replacement on WG4953  (Read 1742 times)

0 Members and 1 Guest are viewing this topic.

korendog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 93
  • Last login:May 05, 2011, 03:24:14 pm
  • The squeaky wheels gets the grease!
Diode Replacement on WG4953
« on: July 11, 2010, 11:37:14 pm »
This chassis is blowing the fuse on the chassis board and it has blown the fuse on my test bench.  I'm suspecting it is one of the diodes. The monitor manual list these numbers for the diode (201X3120-216) Diode, RM-1AV  These numbers are greek to me and I tried Radio Shack, but of course they have no clue.  Could someone translate these for me so I can find suitable replacements.  I'm pretty sure Bob Roberts would stock these but I have no idea what to purchase.
Logged
Capcom Bowling, Star Wars (Cockpit), Karate Champ, MAME (Vertical)

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Diode Replacement on WG4953
« Reply #1 on: July 12, 2010, 04:19:37 am »
Logged
Not a technician . . . . just a DIY'er.

MonMotha

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2378
  • Last login:February 19, 2018, 05:45:54 pm
Re: Diode Replacement on WG4953
« Reply #2 on: July 12, 2010, 09:32:03 am »
Specs on that appear identical to a 1N4005.  You could also use a 1N4006 or 1N4007 if those are easier to find.  Depending on the application, a 1N4004 might work (rated 400V instead of 600V, but the original may be overspec'd), and those are really easy to get.  I think Radio Shack still has them.
Logged
Pages: [1]
  
Go Up
« previous next »