Author Topic: Ultramap run-time error 53 (FIXED!) (Read 2192 times)

Onyx_PghPA · « **on:** May 11, 2010, 02:26:41 pm »

I was wondering if anyone has encountered this before.

I'm running the Mala frontend on Windows XP Professional (32-bit) and using the UltraStik Mapper 1.3 plug-in. Whenever Mala starts, I get the following error message:

"Run-time error '53' File Not Found: libusb0.dll"

I suspect is has something to do with this: http://sourceforge.net/projects/libusb/, but for the life of me I have no idea what needs to be done with it. Running the .exe doesn't seem to do much of anything.

Copying the libusb0.dll from the file above to my system directory makes the first error go away, but gives me a new one:

"Run-timer error '453': Can't find dll entry point usb_open_by_id in libusb0.dll"

Anyone have any thoughts on this?

Thanks!

Usul · « **Reply #1 on:** May 12, 2010, 03:56:17 am »

have you just installed the U360? So first-time use?

Onyx_PghPA · « **Reply #2 on:** May 12, 2010, 11:23:21 am »

"...first time use?"

Sort of. It's been installed in my cabinet's control panel for over two years and was working flawlessly with my original installation of XP and Mala for a long time until I recently upgraded my motherboard/CPU and did a fresh install.

headkaze · « **Reply #3 on:** May 12, 2010, 12:10:38 pm »

Have you downloaded the latest version?

Onyx_PghPA · « **Reply #4 on:** May 12, 2010, 01:22:33 pm »

Quote from: headkaze on May 12, 2010, 12:10:38 pm

Have you downloaded the latest version?

Of UltraMap? Yes, I have 1.0.19 (August 07). The plugin for MaLa is also current: 1.3. I have the most-recent, non-beta release of MaLa: 1.05a.

Usul · « **Reply #5 on:** May 13, 2010, 04:18:38 am »

I had a similar or even the same error message, when I installed my U360s.
The mistake I did was that I plugged in all of my 4 U360s at once. By installing only one the software worked. And then I could hook up the other ones.

Onyx_PghPA · « **Reply #6 on:** May 13, 2010, 12:32:57 pm »

Unfortunately, I just have one.

headkaze · « **Reply #7 on:** May 13, 2010, 12:40:31 pm »

Can you apply maps directly in UltraMap?

Onyx_PghPA · « **Reply #8 on:** May 13, 2010, 02:51:23 pm »

I just tried to go into Ultramap.exe and it gives me the 'error 53' so I'm thinking the plugin isn't the issue.

Onyx_PghPA · « **Reply #9 on:** May 20, 2010, 05:21:10 pm »

Andy was kind enough to let me know that I was running the wrong version. Not sure how I missed that since I was dead sure that I already had 1019 installed.

Oh, well. Live and learn -- I feel REALLY embarrassed.

Thanks everyone for your advice. This is such a great community!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Ultramap run-time error 53 (FIXED!) (Read 2192 times)

Onyx_PghPA

Ultramap run-time error 53 (FIXED!)

Usul

Re: Ultramap run-time error 53

Onyx_PghPA

Re: Ultramap run-time error 53

headkaze

Re: Ultramap run-time error 53

Onyx_PghPA

Re: Ultramap run-time error 53

Usul

Re: Ultramap run-time error 53

Onyx_PghPA

Re: Ultramap run-time error 53

headkaze

Re: Ultramap run-time error 53

Onyx_PghPA

Re: Ultramap run-time error 53

Onyx_PghPA

Re: Ultramap run-time error 53 (FIXED!)