Author Topic: Hantarex Polo 15/25 what amp fuse should I be using (UK) (Read 1414 times)

wilno45 · « **on:** May 04, 2010, 12:12:44 pm »

I have checked it works using a cut off old TV plug and cable (not sure what fuse is in there, away from home at the
moment so cannot check). I would like to add an on/off switch between the monitor and the plug and need to know
the amp rating to use.

If I could get any pointers to the fuse I should use in the plug and any suitable mountable switch I would be most greatfull.

Switches I would like to use include...

http://www.maplin.co.uk/Module.aspx?ModuleNo=2365

http://www.maplin.co.uk/Module.aspx?ModuleNo=43595

http://www.maplin.co.uk/Module.aspx?ModuleNo=98091

http://www.maplin.co.uk/Module.aspx?ModuleNo=2360

Thanks

grantspain · « **Reply #1 on:** May 04, 2010, 03:28:29 pm »

5 amp will do for fuse plug a switch,the chassis has an onboard 3.15a fuse

wilno45 · « **Reply #2 on:** May 04, 2010, 05:30:49 pm »

Thanks very much.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news