Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG 19K7203 no blue  (Read 1347 times)

0 Members and 1 Guest are viewing this topic.

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
WG 19K7203 no blue
« on: March 26, 2010, 10:51:55 am »
I have a WG 19K7203 monitor.  Works great except suddenly lost all the blue. Blue pots on neck board look good. Any direction would be greatly appreciated.
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: WG 19K7203 no blue
« Reply #1 on: March 26, 2010, 11:05:58 am »
Check the neckboard for bad solder joints.
Check the video input header pins for bad solder joints.
Logged
Not a technician . . . . just a DIY'er.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:Yesterday at 12:18:25 pm
  • I break stuff...then fix it...sometimes
Re: WG 19K7203 no blue
« Reply #2 on: March 26, 2010, 11:54:43 am »
sometimes the video amplifier goes south and acts like it's a dead transistor.

try swapping the color transistors around and see if the dead color moves to another color, if it does, it's a transistor, if it doesn't i'd suspect the video amp.
Logged

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 19K7203 no blue
« Reply #3 on: March 26, 2010, 12:16:27 pm »
Problem solved!  Blue transistor (Q805) on neck board was loose.  Resoldered and all is good again. Thanks so much (again) for all your help guys (or gals).  I'm sure I'll have another question for you soon.  :applaud:
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!
Pages: [1]
  
Go Up
« previous next »