Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Cleaning the stained sides of a Galaxian  (Read 3962 times)

0 Members and 1 Guest are viewing this topic.

ckong

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:October 19, 2020, 06:48:09 pm
  • Retro Games forever!
Cleaning the stained sides of a Galaxian
« on: March 21, 2010, 08:06:18 am »
I recently got a Galaxian cab which still is in pretty good condition:



The original side art still is in very good shape and I am not planning to replace it. However, the sides of the cab are pretty dirty, with a lot of stains and some yellowing. I hope that the photo does show this:



I tried some 'house cleaning' stuff to clean the sides, but without much luck. Does someone know of a cleaning fluid which I could use and which will work? It should be available on the internet (I live in Europe).

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Cleaning the stained sides of a Galaxian
« Reply #1 on: March 21, 2010, 10:36:35 am »
In the US we have something called "Magic Eraser" which is melamine foam.

http://en.wikipedia.org/wiki/Melamine_foam

works wonders.

SavannahLion

  • Wiki Contributor
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5986
  • Last login:December 19, 2015, 02:28:15 am
Re: Cleaning the stained sides of a Galaxian
« Reply #2 on: March 21, 2010, 01:09:13 pm »
In the US we have something called "Magic Eraser" which is melamine foam.

http://en.wikipedia.org/wiki/Melamine_foam

works wonders.

Uh... keep in mind that "Magic Eraser" is abrasive and if you use this on a polished surface that's softer than the foam, you'll scratch the ---steaming pile of meadow muffin--- out of it. If you're not careful you can remove the paint itself depending on how the artwork is applied. If you want to go this route, try it on a small area (like the bottom corner) to see how it affects the paint.

WunderCade

  • Hey Saint, wanna update my custom title? ;D
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3041
  • Last login:April 11, 2023, 07:54:12 am
Re: Cleaning the stained sides of a Galaxian
« Reply #3 on: March 21, 2010, 01:20:57 pm »
I think the sideart on a Galaxian is vinyl, isn't it?

Try TSP first. If that don't work, try the Magic Eraser.

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:February 25, 2025, 08:29:42 pm
  • There's my post
    • RayB.com
Re: Cleaning the stained sides of a Galaxian
« Reply #4 on: March 21, 2010, 03:44:49 pm »
Figure out if it's just nicotine staining first. Use cleansers meant for that and soft sponge/cloth.

Then try the magic eraser. Be careful going over dark areas.
« Last Edit: March 21, 2010, 04:15:11 pm by RayB »
NO MORE!!

ckong

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:October 19, 2020, 06:48:09 pm
  • Retro Games forever!
Re: Cleaning the stained sides of a Galaxian
« Reply #5 on: March 21, 2010, 03:52:32 pm »
What is TSP?

I don't think that it is nicotine stains, I mean, how would these stains get on the sidepanels (as a non smoker I hate nicotine stains and cigarette burn marks, especially on CPO's). But if they are, what should I use to get rid of nicotine stains?

RobbyMac

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 228
  • Last login:January 05, 2019, 06:48:50 pm
  • My New years Resolution is 1400 x 900.
    • My cabinet build
Re: Cleaning the stained sides of a Galaxian
« Reply #6 on: March 21, 2010, 11:44:14 pm »
Even if it's vinyl, its screen printed. I would use caution with a magic eraser over any colored areas (other than the white)

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Cleaning the stained sides of a Galaxian
« Reply #7 on: March 22, 2010, 07:34:48 am »
I used one on mine and it was fine.  Of course, YMMV.  If it starts to take off color, stop!

Level42

  • Wiki Contributor
  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5965
  • Last login:November 13, 2018, 01:56:39 am
  • A Suzo stick is a joy forever...

ckong

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:October 19, 2020, 06:48:09 pm
  • Retro Games forever!
Re: Cleaning the stained sides of a Galaxian
« Reply #9 on: March 23, 2010, 06:50:37 am »
http://forum.arcadecontrols.com/index.php?topic=62784.msg630869#msg630869

Dasty? Is unfamiliar to me but I will try this first because it's available in a Dutch shop. May I ask where your wife bought it?