Author Topic: NEOTEC NT-2701 no picture and I'm out of ideas (Read 1651 times)

Quarterpast · « **on:** March 10, 2010, 08:34:39 pm »

I've got a Gauntlet Legends cabinet with a NEOTEC NT-2701 monitor that doesn't give me any picture. I get no neck glow, and no squeal. Background may help so here's what I can tell you. The cabinet was working perfectly, before being moved into a garage for a few months. When it was brought back in, the monitor didn't work. My first assumption was that I had a bad flyback, so i replaced it. Still nothing. Taking the shotgun approach, I then replaced every cap on the main and neck boards. Still nothing. Upon further investigation, I noticed charred gook coming out of C19 on the pin cushion board, so I replaced all of the caps on that board as well. Still nothing.

Any suggestions?

Ken Layton · « **Reply #1 on:** March 11, 2010, 10:44:57 am »

The manufacturer's service department will repair that chassis.

www.neotecgraphic.com

Or you can send it to Chad at arcadecup.com


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: NEOTEC NT-2701 no picture and I'm out of ideas (Read 1651 times)

Quarterpast

NEOTEC NT-2701 no picture and I'm out of ideas

Ken Layton

Re: NEOTEC NT-2701 no picture and I'm out of ideas