Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: K7000 problem  (Read 1353 times)

0 Members and 1 Guest are viewing this topic.

mrk8814

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:November 18, 2012, 01:53:26 pm
K7000 problem
« on: March 05, 2010, 07:56:50 pm »
I have just installed a cap kit and new flyback and all I get is this screen with sound, any ideas?

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: K7000 problem
« Reply #1 on: March 05, 2010, 08:42:17 pm »
Looks like you have no video signal going to the monitor.
Is the video input cable from the game plugged into the monitor?
If it is, what pins are the wires on ? (red, green, blue, ground, Sync)
Not a technician . . . . just a DIY'er.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7513
  • Last login:July 04, 2025, 12:24:07 pm
  • I break stuff...then fix it...sometimes
Re: K7000 problem
« Reply #2 on: March 05, 2010, 08:50:21 pm »
well first off, you going to have to turn down that screen on the flyback

mrk8814

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:November 18, 2012, 01:53:26 pm
Re: K7000 problem
« Reply #3 on: March 05, 2010, 08:54:18 pm »
everything is plugged in, the wires coming from the yoke to the chassis ( which can only go one way), the video signal from the game board to the chassis is plugged in correctly as well...thing is i have another 7191 chassis and it works perfectly when i plug it in this cabinet, but that chassis is for my mortal kombat cabinet. ok, screen setting is turned down slightly...

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: K7000 problem
« Reply #4 on: March 05, 2010, 10:41:09 pm »
Ok, so the game IS playing "blind" then. (playing, but no image)

Check the solder joints on the header pins where the video cable plugs in to the chassis.
Not a technician . . . . just a DIY'er.