Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Polo 2/25 Wont sync 24kz  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

akastaff

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 09, 2014, 03:53:55 am
Polo 2/25 Wont sync 24kz
« on: February 22, 2010, 06:19:04 am »
Got a Sega Rally which is medium res but when I use a this Polo 2/25 I have it is way out of sync and I presume it is only running in 15kz, I thought the Polo 2/25 chassis auto switched..

Can see picture no problem but the scan rate is all wrong..

Any help, surgestions welcomed.

Thx
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:June 21, 2025, 12:51:59 pm
Re: Polo 2/25 Wont sync 24kz
« Reply #1 on: February 22, 2010, 01:23:09 pm »
some polo 2 are manual switch using a jumper plug near the psu cage
Logged

akastaff

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:May 09, 2014, 03:53:55 am
Re: Polo 2/25 Wont sync 24kz
« Reply #2 on: February 23, 2010, 09:29:29 am »
Cannot see anything on it, the labeling does not mention Auto or anything to indicate dual res which makes me think it is 15kz only but didnt know the POLO 2 range had only 15kz.
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:June 21, 2025, 12:51:59 pm
Re: Polo 2/25 Wont sync 24kz
« Reply #3 on: February 23, 2010, 01:08:17 pm »
if its an auto switching chassis then there is an extra board standing vertical in the psu cage-if its manual switching there is a 4 pin jumper plug(green)'
i am not aware of any polo 2 15khz only
Logged
Pages: [1]
  
Go Up
« previous next »