Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: mortal kombat monitor question  (Read 2038 times)

0 Members and 1 Guest are viewing this topic.

mkfan

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:April 22, 2010, 01:10:31 am
mortal kombat monitor question
« on: February 11, 2010, 06:08:15 pm »
is it safe to pull a mortal komat monitor out of the cabinet before i discharge it?    it looks like it would be a pain if i tried discharging it while it was still in the cabinet.
Logged

Jack Burton

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1384
  • Last login:April 07, 2025, 02:12:05 pm
  • .
Re: mortal kombat monitor question
« Reply #1 on: February 12, 2010, 07:46:14 pm »
It is safe as long as you are very careful.  Make sure you read up on monitors and safety around them before you do this.  Read the monitor wiki and the tutorials on the main byoac site.  If you have any other questions don't hesitate to ask here.
Logged

MK3FAN

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 975
  • Last login:May 09, 2022, 07:07:29 pm
Re: mortal kombat monitor question
« Reply #2 on: February 13, 2010, 06:21:52 am »
What kind of chassis do you have? If it's a K7000 series, I think those are supposed to discharge automatically. As long as you don't stick your finger under the anode cap, you should be ok. This video may help...

Logged
Current collection - 28 cabs, 4 pins. (32 machines and not enough room)

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: mortal kombat monitor question
« Reply #3 on: February 13, 2010, 01:04:12 pm »
On a dedicated MK you're going to remove the bolts and pull the monitor towards you, tube to chest.  You're going to hold on to the frame.  As long as you do that, you won't be shocked.

Stick your tongue in the anode hole and you've got another story, however.  :)
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7516
  • Last login:September 13, 2026, 07:21:24 pm
  • I break stuff...then fix it...sometimes
Re: mortal kombat monitor question
« Reply #4 on: February 13, 2010, 01:37:29 pm »
Quote
Stick your tongue in the anode hole

bwah hahahaha!!!!  :laugh2:
Logged
Pages: [1]
  
Go Up
« previous next »