X-Box DuoX-2 Mod will not boot after being unpluged(fixed)

[fairway2000]

Hello

I installed a DuoX-2 mod chip a year or so ago.It was unpluged over the winter on my boat.Now it will not boot from the power button.If I use the eject button it will boot just fine and run any game.If you boot from the power button the red light on the Mod chip flashes.The green on the power flashes and the hard drive will pulse.After 3 times the red light on the eject button will flash and will not boot.Any idea where to start?

Thanks

[NickG]

some ideas...
If it powers on to an error screen:
1. look up the error at xbox-scene or somewhere
2.  leave it plugged in for an hour so the battery type thing for the clock can charge
If it doesn't power on at all:
 

[fairway2000]

There is no errors. My son used it all summer. So it should have charged.
Thanks.Any other ideas are welcomed

[NickG]

It's a common symptom of many possible problems.  Here is a roundup of possible solutions someone made:
http://www.fileforums.com/showthread.php?t=47605

My (ver. 1.6) xbox used to have boot issues after sitting around awhile, until I scraped out the alternate D0 point (on top of the mainboard) and soldered to that point instead.

[fairway2000]

Thanks NickG. I never left the unit on with the Mod chip powered up only with the eject button. I just let the red lights flash.Came back and it powered up.

Thanks