Author Topic: FS: Atomic BYOAC Stickers / Button Labels (Read 8245 times)

conseit68 · « **on:** July 07, 2005, 08:24:59 am »

Ok this is what pixelhugger and gozur was referring to in the other thread. I am selling off the below logo...any single color with sizes from 5" x 5" up to 21" x 21"...these are going to be made on an as ordered basis so give me 5-7 days per order. Pricing is $1.00 per inch as explained below. All prices are based on size, quantity, and the time it takes for me to remove the unused vinyl. Custom sizing and colors such as chrome, gold, reflective, and UV reactive are availible for additional charges. Shipping is included to anywhere in the United States, PM me if your outside of the country for shipping fees. Special thanks to pixelhugger again for the use of his art

NinjaEpisode · « **Reply #1 on:** July 07, 2005, 08:41:08 am »

You want PMs or in thread orders?

conseit68 · « **Reply #2 on:** July 07, 2005, 08:44:44 am »

I would prefer thread order unless there is a question then just pm or email me. thanks ninja...I knew I would forget something

***All questions concerning costs please make via PM...thanks

NinjaEpisode · « **Reply #3 on:** July 07, 2005, 08:46:41 am »

Cost for 4 10"x10" in yellow?

Ooops, PM sent.

Goz · « **Reply #4 on:** July 07, 2005, 11:46:01 pm »

I just want to bump this for Conseit68. He made some custom NAOMI stickers for me and did an amazing job. The atomic BYOAC logo will look nothing short of spectacular.

Thanks for doing this for the community.

-Goz

LPZ · « **Reply #5 on:** July 08, 2005, 05:38:17 am »

I've been searching for some sideart for some time now....BY GOLLY I THINK I'VE FOUND IT!

conseit68 · « **Reply #6 on:** July 08, 2005, 09:18:58 am »

thanks for the kind words goz

lpz just pm me with what you need

AlanS17 · « **Reply #7 on:** July 08, 2005, 10:37:04 am »

What's the smallest you can get it and still have it be legible? I'd consider putting one on my truck, but I was thinking of something around 3".

conseit68 · « **Reply #8 on:** July 08, 2005, 10:50:55 am »

4" would be the smallest I could go due to the wording around the outer band, but that will be close

just let me know...

missioncontrol · « **Reply #9 on:** July 08, 2005, 11:48:42 am »

FYI the BYOAC logo Hotwhls made for me is 4 1/2 inches from outer ring........

I wouldn't recomend going any smaller that that..........

hope this pic helps to see the size......

close up in this thread

conseit68 · « **Reply #10 on:** July 08, 2005, 12:15:00 pm »

yep i agree...4" would be difficult thanks for the input missioncontrol

missioncontrol · « **Reply #11 on:** July 08, 2005, 12:23:36 pm »

Quote from: conseit68 on July 08, 2005, 12:15:00 pm

yep i agree...4" would be difficult thanks for the input missioncontrol

NP

might want to ask a mod if this can be stickied for a week or so to generate interest

cw · « **Reply #12 on:** July 09, 2005, 12:06:37 pm »

looks great......

7" for me would do fine

Timoe · « **Reply #13 on:** July 11, 2005, 01:56:41 pm »

I would like two (2) 7" in white.

JoyMonkey · « **Reply #14 on:** July 12, 2005, 10:49:46 am »

Here's an updated PDF of the button label stickers. I haven't even started cutting these yet (I've got about 30 SASE's, so this is going to take a while to cut), so let me know if this needs any changes before I go ahead with it.

Edit: PDF file removed. Take a look at the JPG in the first post of this thread.
This file is based on Nannuu's original stickers (thanks Nannuu!). I just added the button labels at the top.

JoyMonkey · « **Reply #15 on:** July 12, 2005, 12:59:53 pm »

I just cut a couple of sets of these and even at the slowest setting (takes about 10 minutes to cut one set) the t-stik dust washer graphics is too small to be weeded properly (those 'way' letters are 1/20 of an inch tall). I'll need to revise the graphics before I proceed with cutting everybodys, sorry.
Also, the 'made in the USA' part of the Taito logo is too small, I'll have to remove it.

nullb0y · « **Reply #16 on:** July 25, 2005, 11:54:55 am »

are the partially clear?

i think using one as sideart would be awesome on frankenmame lol

conseit68 · « **Reply #17 on:** July 25, 2005, 01:04:32 pm »

anything white would be empty space...so yes I am sure they would look nice as sideart.

Timoe · « **Reply #18 on:** August 09, 2005, 11:23:31 am »

I got my atomic logos the other day and they are great. Thank you VERY much conseit68.

Also, I rec'd a set of buttons stickers (from JoyMonkey) but you can get them from Conseit68 now.

I was a little concerned with the difficulty of the button sticker application. I tried it out last night and it worked GREAT. these things are very cool. Thank you.

Scoobie · « **Reply #19 on:** August 10, 2005, 11:09:21 am »

conseit68,

PM sent.

missioncontrol · « **Reply #20 on:** August 19, 2005, 05:12:07 pm »

Got my custom stickers today thanks they look great..... way better than I hoped

Scoobie · « **Reply #21 on:** September 03, 2005, 12:46:53 am »

Does anyone still have these stickers?

I sure would love to get a set! Thanks!!

Timoe · « **Reply #22 on:** September 08, 2005, 11:00:30 pm »

Heres a pic of my test run. They worked out better than I expected. I hope when I use them for real to get even better results.

muttonchop · « **Reply #23 on:** September 13, 2005, 11:02:35 pm »

pm sent for button stickers =)

nullb0y · « **Reply #24 on:** September 29, 2005, 10:44:07 am »

how much are button stickerS?

SirPoonga · « **Reply #25 on:** September 30, 2005, 04:12:42 pm »

would it be possible to ask for a suggestion on hte stickers? If so my suggestion is a computer mouse icon so one can insicate which buttons are mouse buttons.

missioncontrol · « **Reply #26 on:** October 01, 2005, 08:26:41 am »

here I thought I had a new scrabble word:

Silver · « **Reply #27 on:** October 01, 2005, 09:44:38 am »

How well do the buttons stickers sit on buttons? They look good but I am worried they will just peel off with grubby fingers banging on them the whole time.....

pointdablame · « **Reply #28 on:** October 01, 2005, 11:29:43 am »

Quote from: Silver on October 01, 2005, 09:44:38 am

How well do the buttons stickers sit on buttons? They look good but I am worried they will just peel off with grubby fingers banging on them the whole time.....

Most of the buttons wouldn't be banged on constantly though. They are all start, coin, pause, etc.... buttons that get one press every now and again.

You could also throw on a layer of clearcoat on the button if you want a bit more security.

Silver · « **Reply #29 on:** October 03, 2005, 06:02:27 am »

Do you buy the button stickers in that whole set or on there own?

Also - how much are they?

Thanks

Scoobie · « **Reply #30 on:** October 14, 2005, 12:59:52 pm »

Many thanks to timoe for sending the stickers.

krion · « **Reply #31 on:** October 25, 2005, 08:22:28 am »

any ability to get a set of these button stickers printed still? I would really love to get my hands on some!

peanut · « **Reply #32 on:** October 26, 2005, 03:34:37 am »

conseit68 was suppost to send me some about 2 months ago, but i havent heard anything from him. Id really like to put the finishing touches on my CP. heh

LPZ · « **Reply #33 on:** October 26, 2005, 08:29:39 am »

Same story here. Maybe someday they will arrive.

TehJefe · « **Reply #34 on:** August 29, 2006, 02:03:45 am »

I saw similar stickers on Kneival's "woody" project, and they excited me sexually. This was the closest thing to a result I found through searching the boards. Is anyone doing anything like this anymore? If not, any suggestions on somewhere else to go to get them?

NightGod · « **Reply #35 on:** August 29, 2006, 02:31:59 am »

http://forum.arcadecontrols.com/index.php?topic=49291.0

MikeDeuce is the man to talk to, at least about the button stickers. No clue on the BYOAC ones. He also does sheets like the one conseit shows in his July 7th post, which is what I think you're talking about.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news