Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: [SOLD] econ - Emulation Console / Arcade  (Read 18825 times)

0 Members and 1 Guest are viewing this topic.

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
[SOLD] econ - Emulation Console / Arcade
« on: September 15, 2011, 04:26:21 am »
I am selling this to make room for more new projects. It works perfectly and runs completely cool and silent. The SSD makes it amazingly fast and it boots up in just 20 seconds.  This is just perfect to use with HDTV, projector or even a monitor. Couple it with a pair of Xbox 360 or Playstation 3 controllers and you have the perfect console emulator.

This is the only one made.

I prefer to ship to Europe, but I can ship everywhere in the world.

Specifications:

- Custom made acrylic cabinet with real american walnut veneer - Very high quality / durable
- Seimitsu LS-32 with 34 mm blue ball top
- Sanwa 30 mm OSBN-30 blue pushbuttons (6 pcs)
- Seimitsu 24 mm PS-14-DN black pushbuttons (3 pcs)
- Ultimarc MiniPAC with harness
- E-limitator - 2/4/8 way electronic switch

- Asrock E350M1 - Dual Core and onboard DX11 gfx with HDMI (Any mini-itx board will fit)
- 2 GB DDR3-1333
- 64 GB SSD - Crucial C300 RealSSD SATA6 (Any 2.5" HDD / SSD will fit)
- 60 mm ultra low noise fan
- PicoPSU 80 watt

Software:
Windows 7 Starter
Maximus Arcade
MAME 0.139 + NES + SNES + Genesis + SMS + N64 + PSX and more

Pictures:
Motherboard & SSD mounting panel:


Controls:


The final result






Read more about it here and see more pictures!
http://www.koenigs.dk/mame/eng/stepecon.htm

« Last Edit: September 17, 2011, 02:56:33 pm by lokesen »
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: econ - Emulation Console / Arcade
« Reply #1 on: September 15, 2011, 08:19:03 am »
Well... The price it cost to make it, not including the hours I put in it, is probably higher. But either way, it's the price...
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

MameMaster!

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2058
  • Last login:June 29, 2019, 10:13:13 am
  • Engage number one!
    • Mame Invaders!
Re: econ - Emulation Console / Arcade
« Reply #2 on: September 15, 2011, 10:38:50 am »
PM sent.  :cheers:
Seriously. Will it fit in my basement or what?

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: econ - Emulation Console / Arcade
« Reply #3 on: September 16, 2011, 10:23:24 am »
I just made a price with and without the SSD - If you got a normal 2.5" HDD you would like to use instead and safe some money.
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

Donkbaca

  • Our reptillian overlords would be pleased
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2648
  • Last login:May 09, 2012, 06:28:10 pm
    • Slim built MAME/Xbox cab
Re: econ - Emulation Console / Arcade
« Reply #4 on: September 16, 2011, 12:18:04 pm »
Hey Loke,

Just curious.  Could you make the kits cheaper if you just did the top in arcrylic, and the sides, back and bottom in MDF?  You don't see those parts very much, I know black arcrylic is expensive.

You know what else I think would be cool, if you could do the case without the joystick on top, slap a cheap atom or other low power thing in there and a small hard drive and have it be a classic console emu.  I would definitely be interested in that.

I know I have been critical in the past, But I like the design, I just don't like the joystick on it...

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: econ - Emulation Console / Arcade
« Reply #5 on: September 16, 2011, 01:39:44 pm »
I'll reply to you in the econ thread :)
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

whatzcrackn

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 848
  • Last login:January 19, 2019, 12:14:02 pm
  • U just won tickets to da 'GUN SHOW'
Re: econ - Emulation Console / Arcade
« Reply #6 on: September 16, 2011, 07:24:12 pm »
Hey Loke,

Just curious.  Could you make the kits cheaper if you just did the top in arcrylic, and the sides, back and bottom in MDF?  You don't see those parts very much, I know black arcrylic is expensive.

You know what else I think would be cool, if you could do the case without the joystick on top, slap a cheap atom or other low power thing in there and a small hard drive and have it be a classic console emu.  I would definitely be interested in that.

I know I have been critical in the past, But I like the design, I just don't like the joystick on it...


I second that!!!  Can you just build the heart and connector of pads? 

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: econ - Emulation Console / Arcade
« Reply #7 on: September 17, 2011, 05:15:55 am »
Please use the other thread to ask questions about future designs. This is only a sales thread. You can ask question about the specific item for sale or bid on it if you like.

 ;) Thanks!
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: econ - Emulation Console / Arcade
« Reply #8 on: September 17, 2011, 09:04:28 am »
I have a buyer, but the deal isn't sealed yet, so I keep the thread open till the payment is made.

Thanks
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

lokesen

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 242
  • Last login:August 12, 2013, 12:17:33 pm
    • WeeCade & Project MAME
Re: [SOLD] econ - Emulation Console / Arcade
« Reply #9 on: September 17, 2011, 02:57:51 pm »
econ is now the property of the user: drawfull

Congrats! Hope you will take care of it, and enjoy using it!
Weecade, Nanocade, Verticade, Project MAME and Taitorama

More to come...

drawfull

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 463
  • Last login:May 18, 2012, 09:30:14 am
Re: [SOLD] econ - Emulation Console / Arcade
« Reply #10 on: September 17, 2011, 03:01:54 pm »
Cheers man, I will be taking v good care of it, don't worry :D

Thank you

Caseyj123

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:January 07, 2012, 02:04:06 pm
Re: [SOLD] econ - Emulation Console / Arcade
« Reply #11 on: September 17, 2011, 11:20:58 pm »
It looks very design... I love it!... But i dont see the price?... :-/


Sent from my iPhone using Tapatalk

adamlk172

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:August 11, 2012, 07:31:08 pm
  • I want to build my own arcade controls!
Re: [SOLD] econ - Emulation Console / Arcade
« Reply #12 on: August 11, 2012, 07:21:46 pm »
hi, this is great! congrats to the buyer you just got something amazing! :D i was just wondering if there is any way in finding out the cost to build this and the other 'projects' as they have inspired me to build one myself! i was looking in more the WeeCade size? thanks! keep up the great work! :D