Author Topic: J-Stick and T-Stick mounting dimensions... (Read 2942 times)

Smack · « **on:** June 08, 2003, 01:40:37 pm »

I just ordered a pair of J-sticks to replace my T-Sticks. (I got a little tired of the feel of the T-Sticks.)

Are the mounting holes the same or does it look like I'm gonna have to re-drill some new panels?

Thanks!

Smack

2slk · « **Reply #1 on:** June 08, 2003, 02:12:33 pm »

If memory serves me right they are not exactly the same. You could email Andy (I assume you ordered them from ultimarc). He usually has very detailed diagrams of his products.

rampy · « **Reply #2 on:** June 08, 2003, 02:38:09 pm »

Quote from: Smack on June 08, 2003, 01:40:37 pm

I just ordered a pair of J-sticks to replace my T-Sticks. (I got a little tired of the feel of the T-Sticks.)

Are the mounting holes the same or does it look like I'm gonna have to re-drill some new panels?

Thanks!

Smack

I just asked this question (hey you wanna ditch/trade/sell you t-sticks, btw?)... my understanding was that J-sticks had "normal" mounting holes (i.e. happs/wico/il whatever) but the t-stick didn't (according hyiu) so I asked Andy for the dimensions of T-stick and he sent me this diagram (attached)

But it's in centimeters -> my intension was to convert it to inches and measure some generic joystick bases and see if they were a drop in replacement...

I know that doesn't really answer your question, smack... but I think this image is the keymaster and if we find the gatekeeper... we'll uh.. get zuul or gozer or something. =P

There is no Rampy only Zuul!

crashdmj · « **Reply #3 on:** June 08, 2003, 02:50:15 pm »

Will a 1 1/8" bit be fine for drilling a hole for the T-sticks?
Derek

rampy · « **Reply #4 on:** June 08, 2003, 03:04:33 pm »

Quote from: crashdmj on June 08, 2003, 02:50:15 pm

Will a 1 1/8" bit be fine for drilling a hole for the T-sticks?
Derek

I wouldn't see why not *shrug* it's a pretty standard size (for joystick holes...) the worse case scenario I've heard of is (in general) to use a 1 1/4" hole... but i haven't come across that personally in my limited experience...

Rampy

Ledbetter · « **Reply #5 on:** June 08, 2003, 03:46:14 pm »

The J-Stick has 2 sets of mounting holes. The outer holes fit the standard Wico/ Happs placement. It also has a set of inner oval holes that will line up with T-Stick dimensions.

Smack · « **Reply #6 on:** June 08, 2003, 05:06:34 pm »

Quote from: Ledbetter on June 08, 2003, 03:46:14 pm

It also has a set of inner oval holes that will line up with T-Stick dimensions.

Simply put, mint....

Rampy - I'm gonna hang onto them, I'm smelling another project coming on... Of course, should laziness creep in, I'll drop you a line.

Smack

Brad Lee · « **Reply #7 on:** June 08, 2003, 05:24:01 pm »

Yes, a 1-1/8" hole is fine for T-sticks, that's what I use. The palstic ring covers the hole entirely, and the shaft doesnt come into contact at all with the sides.

rampy · « **Reply #8 on:** June 08, 2003, 08:20:58 pm »

uh.. was this page always on ultimarc's site or is it new?

Smack · « **Reply #9 on:** June 08, 2003, 10:18:01 pm »

Sheepdipppp....

I never noticed that page before!

Again - mint...

Smack

AndyWarne · « **Reply #10 on:** June 09, 2003, 06:43:44 am »

No excuse, that page has been on our site for at least two hours! (LOL)

Andy


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news