Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: New cabinet project and questions  (Read 1588 times)

0 Members and 1 Guest are viewing this topic.

toyguy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:January 26, 2004, 11:07:11 pm
  • I'm a llama!
New cabinet project and questions
« on: December 22, 2002, 06:10:03 pm »
I've just begun construction on my MAME cabinet using LuSiD's plans.  It's coming along well; just about to glue and screw the side panels to the base.

One thing I haven't figured out yet is how a marquee will go on.  I have two strips of the Happs marquee retainers, but I'm not sure I see how they get used.  Do I just staple them to the cabinet top and speaker panel so they wrap around and press on the front of the marquee glass?  If that's the case, I must then have to offset the top panel and speaker panel a little so the marquee comes out flush with the cabinet front?

Any advice on mounting the marquee would be most helpful, so I get it right while assembling the main part of the cabinet.  A local printer is printing me a copy of one the MAME logos from Oscar Controls gallery on 12 mil Lexan that's backed with a white diffusion layer.  That should look sweet when it's backlighted properly.

The other question I had relates to the Happ trackball, specifically the translucent ones.  Anybody have any good suggestions for lighting the ball?  It looks like a light underneath is the way to do it, but I'm not sure how much light is needed.  I'm leaning toward some LEDs under the panel, but any other ideas would be great!

Thanks...
Logged

RacerX

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 831
  • Last login:April 25, 2024, 04:53:33 pm
  • Longtime member, sometime poster.
Re:New cabinet project and questions
« Reply #1 on: December 22, 2002, 07:19:05 pm »
Quote from: toyguy on December 22, 2002, 06:10:03 pm
The other question I had relates to the Happ trackball, specifically the translucent ones.  Anybody have any good suggestions for lighting the ball?  It looks like a light underneath is the way to do it, but I'm not sure how much light is needed.  I'm leaning toward some LEDs under the panel, but any other ideas would be great!

Thanks...

Some folks have used LEDs for it.  I used a 6 watt bulb with a bayonet mount that I got from Radio Shack.  To power it, I got a 5 watt universal AC adapter, also from Radio Shack.  
Logged

StingMe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 36
  • Last login:December 18, 2002, 02:30:38 pm
  • * Ouch! *
Re:New cabinet project and questions
« Reply #2 on: December 22, 2002, 07:30:50 pm »
Quote from: toyguy on December 22, 2002, 06:10:03 pm
One thing I haven't figured out yet is how a marquee will go on.  I have two strips of the Happs marquee retainers, but I'm not sure I see how they get used.

Here's a recent threat on the topic:

Marquee Help
Logged
Pages: [1]
  
Go Up
« previous next »