Thank you guys!
Really appreciate the pep!
Well, I have now managed to get the base of the legs/cabinets mocked up,
they need some adjusting here and there, mostly the mounting holes for the metal frame needs to be adjusted up on the left side and in on the right.
The doors will be a real pain to get right, the right one is fine, but on the left one something is skewed
and at the moment I don't know if it's the door or the surrounding panels.
Since I routed the middle line I really need to fix that to get it to line up!
With the frame fitted I also tried test fitting the Screen, the QI-charger and the EL background light for the Encom logo.
The result was that I need to adjust the fittings for the Screen (so I can slide it back a bit
since the viewing angle when sitting shows a bit to much of the screens frame at the bottom)
and I need to get some proper spacers for the charger and EL-Background made so it fits tight against the glass!
The QI-Charger works well, but it's still a bit picky about the placing,
you have to really be dead center of the circle with the phone to get the connection,
so lucky me that I decided to do a circle. So I know where to put the phone ^_^
Next thing on the list is to make the top parts of the cabinets (that will hold the amp, card-reader and DVD),
make the adjustments and drill up holes for all the cables. Then it's of to sanding and paint!