Author Topic: D9200 with Mame. What is needed. (Read 1412 times)

odiefish · « **on:** April 21, 2016, 08:46:09 am »

I ama complete noobie when it comes to monitors. I have teleworking WgD9200 monitors. I am thinking of building a 4 player cabinet for things like Gauntlet to NFL Blitz. So they will range from low to medium resolution. I have heard about the reliability etc but it is what I have. Does the D9200 switch to low resolution automatically? Or will have to rewire?6 I am a little confused by the seperate vga and cga connections. I plan on using groovey mame or arcadevga. Would it look ok if I just left it in medium or would the older games look bad, remember I have only used LCD. So I am used to beer and not wine lol.

dgame · « **Reply #1 on:** April 21, 2016, 11:11:43 am »

D9200 switches frequencies automatically. VGA and CGA connectors do the same thing, so you can use the VGA connector for all resolutions.

Recommend GroovyMAME and a CRT_Emudriver supported video card:
http://forum.arcadecontrols.com/index.php/topic,135823.0.html


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: D9200 with Mame. What is needed. (Read 1412 times)

odiefish

D9200 with Mame. What is needed.

dgame

Re: D9200 with Mame. What is needed.