Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Converting a WG K4500 to K4600  (Read 1848 times)

0 Members and 1 Guest are viewing this topic.

Danimal187

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:February 06, 2009, 10:29:07 pm
Converting a WG K4500 to K4600
« on: July 28, 2008, 12:13:38 pm »
 

I have an original Galaxian with an original 19” Wells Gardner K4500 in it that is bad. I keep reading how the K4500 is junk and to swop it out instead of repairing it. So I bought a good running WG K4600 on E-bay which should be here some time this week. My tube looks good no burn at all can I just do a direct swop of the boards? Thanks I would appreciate any help I can get on this!!!

 :dunno :dunno :dunno :dunno :dunno :dunno :dunno :dunno :dunno :dunno :dunno
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Converting a WG K4500 to K4600
« Reply #1 on: July 28, 2008, 11:16:51 pm »
Don't know if the yoke and tube are the same.
Logged
Pages: [1]
  
Go Up
« previous next »