Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Small coin door measurements  (Read 1576 times)

0 Members and 1 Guest are viewing this topic.

collywobbles007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:October 08, 2019, 05:24:48 pm
Small coin door measurements
« on: July 22, 2008, 05:33:21 pm »
Hi,

Does anyone know what the cut-out measurements required to fit one of the small coin doors on sale at Happ Controls. I'm interested in the single coin entry version (model 40-0708-00). I've requested the dimensions from Happ but haven't had any response.

Any help appreciated as I need to get my cocktail cabinet pre-cut.

Thanks,
Collywobbles
Logged

Paulson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • Last login:January 29, 2015, 06:55:37 am
Re: Small coin door measurements
« Reply #1 on: July 22, 2008, 05:55:09 pm »

 Err...there are quite a few coin doors on the Happ site...
 If it is this one it fits an aperture 8.5 x 7.5

Logged

collywobbles007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:October 08, 2019, 05:24:48 pm
Re: Small coin door measurements
« Reply #2 on: July 22, 2008, 06:30:14 pm »
Hi,

Thanks for the reply. That's not it though. I provided the model no. - if you punch it in you'll see which one.
Logged

Paulson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • Last login:January 29, 2015, 06:55:37 am
Re: Small coin door measurements
« Reply #3 on: July 22, 2008, 08:02:11 pm »

 HI, sorry I couldn't find the measurements either...even with that ref. number
BTW...did you know that door has a dummy coin mech?


Logged

Paulson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
  • Last login:January 29, 2015, 06:55:37 am
Re: Small coin door measurements
« Reply #4 on: July 22, 2008, 08:04:01 pm »

 Anyways you are probably better off e-mailing Happ & asking them.
Logged

collywobbles007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:October 08, 2019, 05:24:48 pm
Re: Small coin door measurements
« Reply #5 on: July 23, 2008, 04:37:01 am »
I didn't know it was a dummy mechanism! That's no good!

Any suggestions on what is the best coin door for a cocktail cabinet? Maybe I should make that a new post.
Logged

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Small coin door measurements
« Reply #6 on: July 23, 2008, 05:03:20 am »
The door in the picture is the one we sell. Note that the mech is sold separately as on the Happ site.

Andy
Logged
Pages: [1]
  
Go Up
« previous next »