Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Determining if chassis can take 220V  (Read 587 times)

0 Members and 1 Guest are viewing this topic.

AE35

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 605
  • Last login:November 04, 2018, 12:07:52 pm
  • That sure is a nice raygun!
Determining if chassis can take 220V
« on: November 19, 2009, 06:23:05 am »
Hey all!

I have a chassis(Huahao) but nothing indicates the voltage needed. Usually a lot of these
chinese chassis will accpet 90-260V or so, but how to be sure on this one :)

It DOES have a plug(as usual) of the type you would put in a wall socket AC, and the
plug says 250V...but that is probably the maximum for the plug and cable.

At the AC input on the board there's two 250V fuses...

Any advice? I would really like NOT having a stepdown converter:)

Thanks,

Nicholas

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Online Online
  • Posts: 5994
  • Last login:Today at 06:36:11 pm
Re: Determining if chassis can take 220V
« Reply #1 on: November 19, 2009, 01:22:21 pm »
look for a transformer on the ac input