Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: FS: A Few arcade parts & other odds & ends, PC & Parts  (Read 995 times)

0 Members and 1 Guest are viewing this topic.

heffe2001

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 186
  • Last login:September 27, 2021, 04:05:23 pm
  • I want to build my own arcade controls!
    • o'Brewery Brothers
FS: A Few arcade parts & other odds & ends, PC & Parts
« on: October 22, 2007, 09:30:36 pm »
I have some excess arcade parts, buttons, joysticks, etc that I'd like to part with, some new, some used, some very used :).  I also have a small 3.6" digital picture frame that I was planning on decasing, and using in my cabinet to show gameplay cards, and game info, just never got around to it.  All prices are semi-firm, via paypal.  I also have a couple motherboard/proc combos, and a Dell 3000 that needs some parts to be complete.  I'll list the stuff I have below:

3.6" Digital Frame (info here http://www.leedsworld.com/products/item.asp?productnumber=1660-81, and NO, I didn't pay near that).  Frame is powered by either 4 AAA batteries, 5vdc USB, or external power.  I never got around to decasing it, so it's still in one piece, and can be used as a desktop digital frame (has a little plastic part for use as a stand on the back).  Can also play back mp4 files, and mp3's, so you could actually use it as a portable video player if you wanted.  It's got 32mb built in, and accepts SD/MMC cards.  This is for the frame/stand only, nothing else.  I'm asking 45.00 shipped.

Joysticks

1 Happ 4-way Joystick unused
2 Happ 8-way joystick, used (one missing the c-clip)
2 Happ Super 8-way joysticks w/translucent blue versaball shafts, plus the bats they were supplied with (lightly used, maybe 2 or 3 hrs tops) (45 for the lot shipped, firm)

Buttons

6 white, 5 red, 3 blue, 2 green, one orange & one black (a couple new, most used), all nuts, and 7 switches (unless I can dig out more, no promises) (18 buttons w/nuts & 7 switches, as a lot, not going to seperate), 10.00 shipped

6 GroovyGameGear Electric Ice buttons w/cherry switches  (2 with cent marks, one with pacman ghost, other 3 blank), unused 12.00 for the set shipped

PC Stuff

Dell 3000 2.53ghz P4, 256mb DDR-333, 48x CD, XP Home License still on the case.  I'll throw in a 13g EIDE HD, and a 20g EIDE HD, and see if I can dig up a dell xphome install CD.  System has PCI slots only, onboard video & onboard sound.  The 256mb DDR included with the system works for post, I've not tested it any further than that (it was in my parts bin, with a ? on the tag).  I'm asking 150.00 shipped via UPS.  (This includes the factory case & powersupply, it's a running machine).

Asus A7V w/AMD Athlon 1000, 256mb SD-Ram (MAY be a 512, I just don't have a HS to test with).  Needs HS & Fan, but otherwise works 100%  (1x AGPPro, 5 PCI)  Used to be my router PC, but replaced it a couple months ago and shelved this board.  $25.00 shipped

Asus A7V333 Rev 1.01 mobo with Athlon XP2600, 256mb DDR, OEM HSF.  This would make a pretty good MAME machine, should run most roms without any problems.  As with the 3000 above, the ram included was in my ? bin, but powers up and runs with the system no problems at all.  75.00 shipped

I'll likely add more stuff as time goes on, and if anybody just has to have pictures, I could take some, and post them later.
« Last Edit: October 22, 2007, 11:13:16 pm by heffe2001 »

heffe2001

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 186
  • Last login:September 27, 2021, 04:05:23 pm
  • I want to build my own arcade controls!
    • o'Brewery Brothers
Re: FS: A Few arcade parts & other odds & ends, PC & Parts
« Reply #1 on: October 25, 2007, 07:13:03 pm »
Most of this stuff is still for sale, if the prices are too high, feel free to make an offer...