Where can I find a slot cutting router bit for 5/8" T Molding?!?!?

[ahofle]

T-molding.com is out of stock of their bit, and I looked everywhere around town.  I couldn't even find any slot cutting bits, much less one that cuts a 0.075" slot!  Anyone have a used one they are wanting to sell?

Thanks in advance,
Andy

[VMJ Team]

Try www.woodbits.com...that's where I get mine from.

[ahofle]

Thanks for the link!
I assume the 5/64" will be close enough for the tmolding sold by t-molding.com?  I think that comes out to 0.078" where as the bit they are trying to sell on t-molding.com is 0.075".  I just want to make sure the tmolding will be tight enough.

Andy

[teacup]

I think 1/16" is the size most people get, makes sure the molding if nice and tight and won't fall out. And if its too tight you can cut the slot *very* slightly off center, and again on the reverse side to create a bigger slot.

Personally I'd rather get the smaller size, and maybe have to do some extra work than going for the larger size and the tmolding falling out.

[ahofle]

In case anyone else is looking, I found a few more sites that are really cheap.  I ended up getting the 0.070 bit with shank for only $16 and no shipping or tax:

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html

http://www.cheyennesales.com/catalog/cmtslot.htm

http://super-value-tools.com/Cutters_21.html

http://www.toolmarts.com/wingslotcutters.html