Author Topic: goldstar monitor problems (Read 3226 times)

ddb89quad · « **on:** July 17, 2007, 11:52:06 pm »

This monitor is out of a Arachnid Galaxy dartboard. I have had this problem in the past and sent it out and had it fixed. It was just some bad caps and it cost me a bunch. The monitor screen just goes black. I have two more that are doing the same thing so I figure it must be common. Does anyone know how to fix this problem?(which caps to change) Does anyone know of a good place to send monitors for repair that don't rape you?

Ken Layton · « **Reply #1 on:** July 18, 2007, 06:10:40 pm »

www.arachnidinc.com -> tech support -> archives -> TECH TIPS.

One of those old back issues of the tech tips has a page with monitor troubles and it mentions what caps are the problems on each brand they used.

"Wishbringer" and "Texas Hot Shot" on the KLOV forums are good people to send your monitors to for repair.

ddb89quad · « **Reply #2 on:** July 18, 2007, 08:22:36 pm »

Thanks for your help


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: goldstar monitor problems (Read 3226 times)

ddb89quad

goldstar monitor problems

Ken Layton

Re: goldstar monitor problems

ddb89quad

Re: goldstar monitor problems