Thank you thank you! This project would not have been possible without all the great information here on BYOAC. I am very thankful to be a part of this wonderful community.
**************** UPDATE ********************
. The roof back is mounted!
. Plexiglass back support mounted!
I still need to sand everything like crazy to tame those remaining curve details, but the project is coming together very well
PICS!
Screen plexiglass "sandwich" board mounted:
Roof Back Panel mounted:
Front view w/ details of the above progress:
... I think I'm done cutting large pieces of wood!
To summarize this is what's left to do:
. coin door mounting
. route slot cut for T-Molding
. Control Panel planning (finalize where buttons are, test on a scrap piece, etc)
. artwork design & planning
. wood fill
... lots of it! (lots of tiny 1/16 ~ 1/32 gaps here and there ... that's what wood fill is for)
. sand / prime / paint / etc
. Put t-molding on cabinet
. Put marquee retainers and marquee on
. Wire computer / TV / Power back up
. final CP holes for sticks + buttons + wiring