Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Problem with crystal trackball and spinner  (Read 2232 times)

0 Members and 1 Guest are viewing this topic.

Brian

  • Guest
  • Trade Count: (0)
Problem with crystal trackball and spinner
« on: April 03, 2002, 05:13:34 pm »
On my cab I have a crystal trackball and an Oscar spinner. Both of them will move the cursor around in windows but neither will work in Mame. The trackball is connected  with the ps2 plug it came with, should I have cut off the plug and wired it directly to the optipac? I assume I have something wired wrong but I can't figure out what. Thanks.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged

OSCAR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:September 06, 2018, 11:31:53 pm
  • I think Bigfoot is blurry, that's the problem...
    • Oscar Controls
Re: Problem with crystal trackball and spinner
« Reply #1 on: April 03, 2002, 05:24:41 pm »
By default, MAME does not enable the mouse input, which is most likely your problem.

If you are using the command line version, edit either the mame.ini or mame.cfg file to enable mouse support.

If you're using MAME32, open the Default Options dialog box, and the check the box "Enable Mouse" under the Controllers tab.


--OSCAR

« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Logged
Pages: [1]
  
Go Up
« previous next »