Ok,
Here we go,
The bottom is completely metal.
The wood is 9/16 thick
I will start with the top box.
The front is 30" x 7 7/8"
The Sides are 17 7/8 at the top and 15 1/4 at the bottom X 7 7/8
The top of the machine is 24 x 22 1/8 x 3/4 thick
The bottom box.
The front is 24 3/4 x 6 3/4
The side is 12 3/4 at the top and 10 5/8 on the bottom x 6 3/4
The side that has the opening for the coin box to go in, it is 11 1/4 to the outside of the lip/bezel for the coin box.
The measurement for the bottom do not include the extra 1/2 inch of material that is bent out to attach it to the top.
I have attached a few pics. The original Hi Res pics are NOT dial up friendly and their are more then I posted here.
Since they are so large I will not burden Saint hosting them but will make them available in case you need to zoom on something.
http://www.arcadehobby.com/cocktail/And just because I had the camera there is a pic or two of my other machines waiting for me to rescue them and bring them home.
I moved before I could finish off the control panel on the vertical mame machine.