Should I at least see a picture at 60 khz on arcade monitor?

[Panzer]

So I bought a video card that does not fit into my computers slot. (sorry about the terminolgy, or lack there of of)But I do have a VGA out that is at 60 KHZ. So I slpiced my VGA cable and my Wells K7000 series cable together and now at least see some color change on the arcade monitor but there it is still just a garbled mess even when I play with the adjustments.

My question is, I know I can't run the monitor at 60khz for to long or the monitor goes pop, But to test my cable shouldn't I at least being seeing some semblance of a picture, or does it HAVE to be output at 15khz?

Thanks guys!

[NickG]

An easy way to test your cable is to download Powerstrip and try the arcade preset or similar 480i modes.  You can find the specifications for a Wells Gardner K7000 series at Happ.com
According to that, you need to  keep your horizontal sync between 15-25 KHz.  60KHz is too much  keep your Vsync between 47 - 63 Hz.  Powerstrip comes with plenty of documentation/help files, but there is a step by step write up here to make it easier.
http://forum.arcadecontrols.com/index.php?topic=43728.0 

[Ken Layton]

60 khz into a monitor designed only for 15 khz---what are you trying to do start a fire?

[Fozzy The Bear]

60 khz into a monitor designed only for 15 khz---what are you trying to do start a fire?

Ken is absolutely right here..... Not only that but I hope you like a lot of very expensive monitor repairs!!

If you've got a 15Khz Monitor then feed it 15Khz......

Best Regards,
Julian (Fozzy The Bear)

[Panzer]

LOL, No i do not want to start a fire! When I spliced my Vga cord there was a ton of different color wires. Red, Red with White stripe, so on and so forth... I just wanted to see if I put the right wires together until I get a comp that can handle my video card... I guess patience is a virtue 

[subcriminal]

From K7000 Specs on happ's site:
# Horizontal Sync Frequency: 15.1 through 25.0 Khz
# Vertical Sync Frequency: 47 to 63 Hz

If you're talking H sync you'll fry it with that card if you don't know what you're doing! I didn't so I went with an ArcadeVGA. Don't try hooking wires up, make sure you know you're right before hooking it up
 

[RayB]

I just wanted to see if I put the right wires together until I get a comp that can handle my video card... I guess patience is a virtue 

What did you expect, an out of focus image? It doesn't work that way.