Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Ultimarc pushbuttons  (Read 2356 times)

0 Members and 1 Guest are viewing this topic.

neil324

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 76
  • Last login:October 07, 2013, 03:53:50 am
  • I want to build my own arcade controls!
Ultimarc pushbuttons
« on: August 07, 2006, 05:56:10 pm »
Has anyone used the pushbuttons from ultimarc, what size hole do you need to drill to mount the buttons, have looked on the website is it 28mm, just want to make sure becuase im going to prepare the CP before i order the buttons
Logged

rbarr110

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 298
  • Last login:September 25, 2023, 04:02:41 pm
  • I already built my own arcade controls!
Re: Ultimarc pushbuttons
« Reply #1 on: August 07, 2006, 06:01:07 pm »
I used them for my CP and they are fine. 

The size is 1 1/8" diameter (technically just under: 1 1/8" = 1.125", 25 mm = 1.102")
Logged

destructor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:July 18, 2019, 03:10:07 pm
  • I want to build my own arcade controls!
Re: Ultimarc pushbuttons
« Reply #2 on: August 08, 2006, 07:15:58 am »
It's standard size as Happ, X-Arcade pushbuttons. Maybe first order buttons and next drill holes?
Hole should be 28-29mm.

Something in Polish language:
http://www.kowal.itcom.pl/ArcadeParts_pliki/PSL.htm
Logged

TyrannosaurusRox

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:May 19, 2009, 08:36:05 am
Re: Ultimarc pushbuttons
« Reply #3 on: August 08, 2006, 08:20:00 am »
I've ordered a couple of buttons from there in the past and a 28mm spade bit makes the holes just fine...
Logged

destructor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 396
  • Last login:July 18, 2019, 03:10:07 pm
  • I want to build my own arcade controls!
Re: Ultimarc pushbuttons
« Reply #4 on: August 08, 2006, 09:02:51 am »
Buttons have about 27,7mm.
Logged

neil324

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 76
  • Last login:October 07, 2013, 03:53:50 am
  • I want to build my own arcade controls!
Re: Ultimarc pushbuttons
« Reply #5 on: August 08, 2006, 02:18:33 pm »
OK thanks all 28mm it is.
Logged
Pages: [1]
  
Go Up
« previous next »