Author Topic: How Do I add a bill validator to Jamma ? (Read 1640 times)

markymarky99 · « **on:** March 05, 2006, 09:58:07 pm »

HI, I have a MARS ELECTRONICS (VFM4-R1) BILL validator that was working in a Touch Master 8000 machine. I'm converting that cabinet into a very cool multi jamma machine. Does anyone know how to wire the BILL VALIDATOR into my jamma wiring ? I've included a pic, there's a lot of wires coming out of the validator. 7 wires from one part (white, red, green, blue, orange, and 2 black!) and another group of wires (2 black, white and yellow) from anothe part. KEN LAYTON mentioned something about wiring into the COIN 2 on a jamma harness, how many of these wires need to be running someplace ? Thanks again guys.

Ken Layton · « **Reply #1 on:** March 05, 2006, 11:49:39 pm »

Bill acceptors come in many operating voltage and signal output types. Best to contact tech support at the manufacturer, www.meiglobal.com


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: How Do I add a bill validator to Jamma ? (Read 1640 times)

markymarky99

How Do I add a bill validator to Jamma ?

Ken Layton

Re: How Do I add a bill validator to Jamma ?