Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: New Dynamo Cab -- Opinions needed  (Read 1438 times)

0 Members and 1 Guest are viewing this topic.

dweebs0r

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 944
  • Last login:January 16, 2025, 02:40:36 pm
  • Ascendo tuum!
New Dynamo Cab -- Opinions needed
« on: February 04, 2006, 10:46:38 pm »
Ok, I went to my first ever "super-auction" today and scored a fairly nice 19 inch dynamo cab for $10.

I got the thing home and plugged it in and got a nice blue monitor screen without flicker and movement.

I have no sound whatsoever or indication that anything is working.

Is there anyway of knowing if my monitor is working at this point?

I want to buy an arcadevga card and Mame this cab but I dont want to spend the money on the arcadevga if the monitor is bad (if I replace it I'll replace it with a Wells Gardner U3100).

Any opinions here would be helpful.

Thx,
-Dweebs
« Last Edit: February 04, 2006, 11:18:36 pm by dweebs0r »

Knievel

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 965
  • Last login:July 10, 2016, 10:29:09 pm
  • Who's up for a game of Stunt Cycle??
    • Knievel Kustoms
Re: New Dynamo Cab -- Opinions needed
« Reply #1 on: February 04, 2006, 10:55:53 pm »
Does it have a game board? I wouldn't expect to see or hear anything without one.  :)

dweebs0r

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 944
  • Last login:January 16, 2025, 02:40:36 pm
  • Ascendo tuum!
Re: New Dynamo Cab -- Opinions needed
« Reply #2 on: February 04, 2006, 10:59:10 pm »
Yep, it has a Buster Brothers game board in it.

I have no clue if it works or not.

The test button doesnt seem to do anything.

-Dweebs

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: New Dynamo Cab -- Opinions needed
« Reply #3 on: February 04, 2006, 11:18:28 pm »
Make sure the JAMMA harness is plugged into the game board.

Make sure the power supply is hooked up properly and is outputting correct voltage.

Make sure the board is plugged into the monitor.

etc

etc

Knievel

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 965
  • Last login:July 10, 2016, 10:29:09 pm
  • Who's up for a game of Stunt Cycle??
    • Knievel Kustoms
Re: New Dynamo Cab -- Opinions needed
« Reply #4 on: February 04, 2006, 11:20:06 pm »
I've revived many dead boards by cleaning the contacts that fit into the wiring harness. An eraser or light sandpaper does the job.
Beyond that I'll leave the troubleshooting to the experts.  :)

dweebs0r

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 944
  • Last login:January 16, 2025, 02:40:36 pm
  • Ascendo tuum!
Re: New Dynamo Cab -- Opinions needed
« Reply #5 on: February 04, 2006, 11:22:55 pm »
To my untrained eyes, everything looks hooked up but bear in mind, that I'm a dumba**.    :laugh:

I guess I'll go ahead and grab an arcadevga card and try to hook a low-spec computer up to this thing to get it running on the cheap.

Those things hard to hook up to the monitor?

I'm used to just plugging in the vga cable on the U3100 I had.

-D




markrvp

  • ARGHHHHHHHHHHHHH!!!!!!!!!! True Genius!
  • Wiki Contributor
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3353
  • Last login:September 14, 2020, 10:19:57 am
  • NFL Expert
Re: New Dynamo Cab -- Opinions needed
« Reply #6 on: February 05, 2006, 12:09:26 am »
Get Andy's video amp and cable as well.  The amp has a Eurpean style terminal block where you screw down the wires from the monitor.  You just use the VGA to VGA cable to connect the amp to the AVGA.

Q*Bert_OP

  • Wiki Contributor
  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2089
  • Last login:October 25, 2012, 07:20:42 pm
  • Oh yes, we did!
Re: New Dynamo Cab -- Opinions needed
« Reply #7 on: February 05, 2006, 12:12:06 am »
Buster Bros. is a capcom CPS1 system game. If all you get is a blue screen with nothing, the board has probably commited suicide :(
WTB: The Grid by Midway (2001), looking for 2 or more complete games, and large marquee

dweebs0r

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 944
  • Last login:January 16, 2025, 02:40:36 pm
  • Ascendo tuum!
Re: New Dynamo Cab -- Opinions needed
« Reply #8 on: February 05, 2006, 09:35:02 am »
Thanks for the opinions guys.

I'll try the arcadevga route and go from there.

Cabinet is in fair shape.  No damage, just needs repainting.

Nice over/under coindoor, needs keys.

If I can get this monitor going, I'll make it a horizontal Mame cab.

Otherwise, I have a decased 19 inch monitor without a home and maybe I'll try to get it in there and make it a vertical monitor for the classics.

Thx again,
-Dweebs