WTB: Star Wars Yoke Parts

[diplo]

So I finally got a star wars yoke!  All I got is the base so I need to round up some parts or find a source for repo parts.  Here is what I think I need:

1.  Handles, both sides
2.  Small gear and pot for up/down axis
3.  Small gear and pot for left/right axis
4.  Cover

If anyone is selling any of these parts let me know.  If you know of a place to purchase repo parts I would appreciate that too.  Thanks

Diplo

[ChadTower]

Isn't that list nearly the entire yoke?  What exactly do you have?

[diplo]

I hope the list is not the entire yoke otherwise this thing is going to weigh 20 pounds!  I've got the main base minus the parts requested above.

[ChadTower]

The yoke actually is fairly heavy.

[GGKoul]

So I finally got a star wars yoke!  All I got is the base so I need to round up some parts or find a source for repo parts.  Here is what I think I need:

1.  Handles, both sides
2.  Small gear and pot for up/down axis
3.  Small gear and pot for left/right axis
4.  Cover

If anyone is selling any of these parts let me know.  If you know of a place to purchase repo parts I would appreciate that too.  Thanks

Diplo

Good luck find thing these parts.  As I have a yoke that is missing the internals and       I have yet to find the internal.  Your only luck is to find a broken yoke on ebay, but those are selling for $100+ now-a-days.

[Hoagie_one]

I hope gamecab gets those repors out quickly as possible.

[GGKoul]

I hope gamecab gets those repors out quickly as possible.

I assume he'll be selling them for $200 if not more

[Hoagie_one]

think so?

[GGKoul]

His first batch was priced at $165. 

But this batch will be USB ready.  So I assume it'll be $200.

[diplo]

Will the grips from happs: http://www.happcontrols.com/joysticks/50250800.htm or the ones from the real bob roberts fit the star wars yoke and work correctly?

[crsdawg]

i might be able to help you some:

try here for some replacement gears:

www.wmberg.com

part number:

[diplo]

i might be able to help you some:

try here for some replacement gears:

www.wmberg.com

part number:

[nostrebor]

Xiaou2 posted these on another thread. They might be a help for your assembly needs...

[ChadTower]

[diplo]

Thanks for the diagram and description.  I have the handles now and everything else I think I can buy.  Can I buy or make something to hold the small gears in place once I get the ones referenced above?  Also, do all pots come standard with the posts that fit into small gears?  Thanks again for all the help

[crsdawg]

hold off a bit before you buy any gears, i might have just found a source for a rebuild kit that includes 4 gears, buttons and some other odds and ends.

i'm not sure they are still available but i have an email into the guy who had them. the pricing seemed pretty reasonable circa 2004. if he still has them it might have changed, since i don't know what it will be for sure(or if he still has some) i'm gong to hold off on that info...no point in putting up possibly bad information.

i need one of these as well, so lets hope he has at least to kits left.

-chris-