hantarex picture tube

[manefreak]

hi Ive got a Hantarex MTc900/e monitor. i had this given to me for a spare but i did notice on the yoke there is a broken resister and i cant read its value. can anybody help?

[jclaeys]

Hi,

I have a Hantarex MTC 900 . If you upload a picture, I could let you know what's on there.

Best regards,
Joachim

[D_Zoot]

There are no resistors on the yoke.  Are you referring to the neckboard ?

There should be a number silkscreened on the board where the resistor mounts, like R143 for example.  That will identify the resistor in question. 

Usually if you have a resistor problem on the neckboard on a 900 it will be either r141, r146 or r143, resulting in a loss of one of the colors.

Those 3 resistors should be  3.3k ohms at 1/2 watt.    For some reason I see 1/4 watt resistors there from time to time, they need to be at least 1/2 watt or they won't last.


D