Author Topic: HELP! touch screen repair (Read 623 times)

delboylfc · « **on:** September 07, 2004, 05:09:47 am »

hi..

i have a TAXAN MicroTouch LCD screen - model: CV620 LCD Monitor

It works (or used to) perfectly, until i opened it up to mount into my jucke box cab!

What happened is there are 2 small wires (orange and grey) which have been disconnected from the main board (see pics).

The screen still works perfectly, except for the touch screen!

I really have no idea where to solder these wires, all i know is they go on the board somewhere!
My soldering skills are quite good, so if know the location to solder, that is no problem..

If anyon has any knowledge of these screens or any help whatsoever, please help me!

cheers

theshakermaker


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: HELP! touch screen repair (Read 623 times)

delboylfc

HELP! touch screen repair